Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 13 October 2000 20:20:00(UTC)
Rank: Guest
Admin

Posted By paul miles I am thinking of studying for a B.S.C diploma in safety management rather than taking the nebosh diploma pt1,what are the differences betwwen the two and is the bsc diploma a nationally recognised qualification the same as the nebosh diploma?
Admin  
#2 Posted : 14 October 2000 16:59:00(UTC)
Rank: Guest
Admin

Posted By Phil Tradgett As someone who has done both the BSC Diploma and the old style NEBOSH Diploma - I found the level of information provided in the BSC courses to be very inferior to that needed for NEBOSH. Of course I did the BSC Diploma some years ago, so things might have changed, but I doubt it. (The BSC Diploma at the time wasn't anywhere near as difficult as the NEBOSH Certificate!). As for whether the BSC Diploma gives you the right NVQ level. It may do, but just take a look at the requirements for job applicants in the 'practitoner' and almost all H&S Recruitment adverts. They almost all ask for NEBOSH qualifications, a good indicator of which way you should go. I hope this helps.
Admin  
#3 Posted : 16 October 2000 16:16:00(UTC)
Rank: Guest
Admin

Posted By Hazel Harvey The British Safety Council Diploma is currently accepted for Affiliate membership of IOSH. The NEBOSH Diploma part 1 gives TechSP membership (equated to National standard level 3) and the part 2 MIOSH level membership (national standards level4) Most employers now require MIOSH so the NEBOSH route could well be the best way through.
Admin  
#4 Posted : 17 October 2000 08:24:00(UTC)
Rank: Guest
Admin

Posted By Mark Thompson A point to add. I have the BSC Diploma and have just found a good Job. It was my experience that when i went for interviews although the prospective employers were asking for NEBOSH it was becuase they were not always aware that there was an alternative. Good Luck with whatever you choose.
Admin  
#5 Posted : 20 October 2000 16:43:00(UTC)
Rank: Guest
Admin

Posted By Jay Joshi The BSC Diploma provides you with a qualification that is nationally & internationally “RECOGNISED” and provides underpinning knowledge requirements to undertake NVQ level 3 & 4 in OH&S practice on similar basis as the NEBOSH two part Diploma. The question of “recognition” is a vexed/complex one because you have to ask by what body and to whom did you ask? Neither the BSC Diploma in Safety Management nor the NEBOSH two part Diploma is currently accredited by the Qualifications & Curriculum Authority (QCA)-which is the main body for accreditation of QUALIFICATIONS! So in that respect both are at par.(The QCA is the regulatory body for public examinations and publicly funded qualifications and QCA takes the lead in designing and developing a coherent national framework of qualifications which meets the needs of education, training, individuals and employers. It defines and maintains clear and high standards of quality assurance expected of awarding bodies) Then the next point is "professional body membership". There is no doubt that IOSH is a leading professional membership body for safety practitioners and for historical reasons more widely known. IOSH has not accredited the BSC Diploma for corporate membership in its more “sophisticated” membership structure and by default gives the lowest level of membership-"Affiliate" to BSC Diploma Holders-which anyone with an interest in health & safety (but without a qualification) can get!! The reasons behind this are historical/commercial and efforts are being made by British Safety Council to remedy this discrepancy. That does not translate into a BSC Diploma holder not being competent and that prospective employers will not employ them. Approximately, more than 6000 candidates have completed/passed the BSC Diploma and many hold very senior positions and are equally COMPETENT as their collegues who have qualified via the NEBOSH route. The fact that the International Institute of Risk & Safety Management (IIRSM) has widened its "Full Membership" criteria to include NVQ Level 3 plus at least 3 years experience does not mean that the BSC Diploma is of less value or its holders less “competent” as was implied in another discussion. The different modes of examination attracts its share of critics-none have a "exam criteria" that certifies COMPETENCE. Employers do state MIOSH and/or RSP for job adverts, but that may be due to the SHP-The S & H Practitioner being an IOSH magazine and lack of knowledge of other qualifications amongst employers. An extract of the guidance to Regulation 7 of the Management of Health and Safety at Work Regulation 1999 states, "Employers are advised to check the appropriate health and safety qualifications (some of which may be competence-based and/or industry specific), or membership of a professional body or similar organisation (at an appropriate level and in an appropriate part of health and safety) to satisfy themselves that the assistant they appoint has a sufficiently high level of competence. Competence-based qualifications accredited by the Qualifications and Curriculum Authority and the Scottish Qualifications Authority may also provide a guide." It does not list the qualifications or the professional body! "Qualifications" and "Professional Membership Levels" are not the same, but linked and the former leads to the latter --"MIOSH" is not a qualification and even in the SHP, employers as advertisers have got confused between the two. Most organisations evolve and improve -so has The British Safety Council-The British Safety Council of today is quality assured to ISO 9002 and is committed to continuous improvement. --This includes its Diploma in Safety Management.. What you have to decide is that in your particular set of circumstances, the route you want to follow-and if Corporate Membership of IOSH is your goal, then you obviously need a qualification that IOSH currently accredits. But that does not mean that there are no other options or that IOSH is the only professional membership body for Safety Practitioners albeit a leading one. The deciding factor is COMPETENCE -- and that is something that cannot be gauged by qualifications and/or level of professional membership alone. Most enlightened employers do not primarily depend on qualifications or level of membership of professional bodies --they tend to structure the selection process to "test" other skills and qualities required for the job. To put my comments in perspective, I have been (and continue to be) a member of both IOSH & IIRSM, prior to working for British Safety Council--my current employer-and I have tried to be as objective as I can. !!!!
Admin  
#6 Posted : 21 October 2000 12:13:00(UTC)
Rank: Guest
Admin

Posted By Bruce Sutherland In a simple answer as an employer - no go for IOSH, and preferably go for Diploma by exam. There are still a lot of "old fashioned" people out here like me who are rightly or wrongly sceptical of new fangled NVQ, and certainly would not touch alternative qualifications probably because we don't know what they involve. But it also depends how far you want to go - if you are looking for the £40k jobs then you will probably hit a glass ceiling without it - if your plan is more lifestyle orientated, then go for the easiest route. Have fun Bruce Sutherland
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.