Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 05 February 2001 15:50:00(UTC)
Rank: Guest
Admin

Posted By Emma Does anybody have details of a supplier of Asbestos Sampling Kits??? Thanks Emma
Admin  
#2 Posted : 05 February 2001 16:01:00(UTC)
Rank: Guest
Admin

Posted By Brian Peirce Emma Try ringing David Wray,0115 8412350. He runs his own Asbestos Consultancy in Nottingham and has been very helpful with regards our organization. Regards Brian
Admin  
#3 Posted : 05 February 2001 19:36:00(UTC)
Rank: Guest
Admin

Posted By Richard I'm not sure if anyone does produce a specific kit. However if you need to compile your own (as i do) i would suggest the following items: 1. Coring tools (I'm working on a suppliers name for you) 2. Smooth pointed tweezers without serrations 3. wire cutters/snips 4. gas pliers for breaking corners of boards 5. stanley knife,hammer, screwdrivers pliers. 6. Spray bottle for wetting sample locations 7.torch (i always use a maglite as they are very robust, but remember not to use them in any areas that potentially flammable atmospheres may occur) 8.Asbestos waste bags (for used disposable overalls, gloves etc.) 9. polythene sheets 1m sq 10. wet wipes to clean tools, ppe, rpe etc 11. sample point labels 12. adhesive tape 13. adhesive warning tape labelled "Danger - Asbestos hazard" 14. polyfilla or equivalent with filling knife 15. aerosol of adhesive or lacquer (e.g. photomount) 16. asbestos assessment sheets, clipboard, pens etc. 17. personal RPE (e.g. orinasal halfmask respirator with ffp3 filters or equivalent), disposable overalls, overshoes, gloves etc 18. camera 19. H - type vacuum cleaner (to BS5415 standard) 20. Sample bags/ridged sample pots Large and small to ensure double bagging of samples As you can see the list can go on. This list of equipment is endless and sampling personnel will customise their kits depending on the type of survey to be carried out. (e.g. a type 3 asbestos survey for pre demolition/ major refurbishment(draft MDHS 100) may require much more equipment and even asbestos enclosures and decontamination units for the duration of the survey (see EH47 and EH51) I'll try to get the suppliers number that i use (misplaced at the moment) hope it helps you Regards, Richie.
Admin  
#4 Posted : 06 February 2001 00:06:00(UTC)
Rank: Guest
Admin

Posted By Bob Randall I would suggest you approach this subject with some caution. Only registered asbestos contractors are permitted to handle asbestos and that includes taking samples. Bob Randall
Admin  
#5 Posted : 06 February 2001 08:49:00(UTC)
Rank: Guest
Admin

Posted By Mark Preston In response to Bob's post... This is not the case - sampling is specifically exempt from the Asbestos licensing regs (I guess you meant licensed when you wrote registered) Anyone sampling should be competent to do so (MDHS 77 and 100)- and there should have been an assessment of exposure (under CAWR)prior to the work - which in itself requires a levevl of competency. I would recommend that anyone undertaking this work obtain the certicates of proficiency in the relevant subjects from BIOH. http://www.bioh.org/qualifications/certprof.htm
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.