Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
karlarmstrong1  
#1 Posted : 21 June 2019 10:00:08(UTC)
Rank: New forum user
karlarmstrong1

Hi all, Just a quick question, Looking at vibration measurements for a rail saw. Front handle is 5.5m/s and the rear handle is 4.2m/s. Do i add these together and take measurements as if it would be 9.7m/s or take them as 2 separate ones and add the exposure together? Both results are miles apart. Cheers Karl

Evans38004  
#2 Posted : 21 June 2019 10:17:17(UTC)
Rank: Forum user
Evans38004

I would have only take the higher value of the two and base your exposure levels, risk assessment and controls on the 5.5m/s2

On a similar note, a jack hammer is used with both hands, expriencing the same vibration exposure levels. One hand is clenched to keep the jammer working - does this affect blod flow / health hazard?

Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.