Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 03 November 2000 08:12:00(UTC)
Rank: Guest
Admin

Posted By D Geoghegan Has anyone got any suggestions on how to avoid the manual insertion of rollpins by hammer. The roll pins we use come in approximately 10 different sizes such as: 5x 50 mm, 5 x 45 mm 10x 50 mm. The ideal method (apart from complete automation), should be one with low noise and free from MSD risk - too much to ask for???
Admin  
#2 Posted : 03 November 2000 11:04:00(UTC)
Rank: Guest
Admin

Posted By Jim Walker I've done this a few times using a big g-cramp, to compress the pin into it's hole. Of course it requires a situation where you can apply the back of the tool to somewhere solid. It is standard workshop practice in the automotive trade to use a press for this. If my memory serves me correctly, many years ago someone lost their eye driving a roll pin in with a hammer.
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.