Rank: Forum user
|
Hi all, Could you please kindly advise- we have installed a sound hearing booth for hearing assessment and the engineer who installed it advise us to conduct a risk assessment as its a confine space? Any advice greatly appreciated.
|
|
|
|
Rank: Super forum user
|
Hi Anet It seems extremely unlikely that this hearing booth would be a "confined space" within the meaning of the term set out in the Confined Spaces Regulations. ....unless it is of very odd design and/or installation. So, I suggest that you look at the definition in the Regulations and work out why you can discount each of the reasons why the booth would come within scope. If, by any chance it DOES fall within scope, probably time to go back to the drawing board.
|
1 user thanked peter gotch for this useful post.
|
|
|
Rank: Super forum user
|
It may be a little bit late after installation to be conducting a risk assessment. Back at the outset of hearing conservation my employer purchased a test deck and booth from Bilsom (other suppliers are available). Location is important not only to avoid unwanted noise transmission affecting the results but also with respect to ambient conditions - you will be surprised how quickly the inside can warm if the booth is in direct sunlight. Our unit came with a fan to effect air changes and even without the design itself was not airtight so the risk of asphxyiation is negligble. The most horrendous aspect was the perforated panel on the back of the access door - the spacing pattern often sending test subjects scurrying for a bucket until a poster was placed in line of sight. The other "fail" on our first installation was in positiong the unit such that the office door opened in to the path of the booth door effectivley locking the test subject inside
|
2 users thanked Roundtuit for this useful post.
|
Anet on 24/07/2024(UTC), Anet on 24/07/2024(UTC)
|
|
Rank: Super forum user
|
It may be a little bit late after installation to be conducting a risk assessment. Back at the outset of hearing conservation my employer purchased a test deck and booth from Bilsom (other suppliers are available). Location is important not only to avoid unwanted noise transmission affecting the results but also with respect to ambient conditions - you will be surprised how quickly the inside can warm if the booth is in direct sunlight. Our unit came with a fan to effect air changes and even without the design itself was not airtight so the risk of asphxyiation is negligble. The most horrendous aspect was the perforated panel on the back of the access door - the spacing pattern often sending test subjects scurrying for a bucket until a poster was placed in line of sight. The other "fail" on our first installation was in positiong the unit such that the office door opened in to the path of the booth door effectivley locking the test subject inside
|
2 users thanked Roundtuit for this useful post.
|
Anet on 24/07/2024(UTC), Anet on 24/07/2024(UTC)
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.