Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 20 May 2008 15:34:00(UTC)
Rank: Guest
Admin

Posted By charlene armour I am currently studying for my NGC in June and intending on taking the diploma afterwards (hoping I pass NGC), but have been told on numerous occasions, that if I dont have a relevant degree, I will find it difficult to enter into the health and safety sector. Is this the case???
Admin  
#2 Posted : 20 May 2008 15:49:00(UTC)
Rank: Guest
Admin

Posted By Jonathan Breeze It's not strictly true Charlene. The "Graduate Member" designation is available to all who have completed a level 6 qualification which can be by degree (though other methods are currently available). This can eventually lead to Chartered Membership of IOSH. Take a look at the membership structure here for a view of the process and alternative routes available: http://www.iosh.co.uk/in...?go=membership.structure That is how I currently understand the situation, though the membership department will no doubt be along to clarify this answer.
Admin  
#3 Posted : 20 May 2008 16:20:00(UTC)
Rank: Guest
Admin

Posted By David F Spencer I took the NVQ4 route because it suited me as a more mature (in years, if nothing else!) student. It was a lot of hard work & no easier than the NEBOSH Dip, but more appropriate to my background.
Admin  
#4 Posted : 20 May 2008 16:45:00(UTC)
Rank: Guest
Admin

Posted By CFT Charlene You may be confusing the issue with adverts for H&S practitioners that frequently state 'must be educated to degree level'. It would greatly depend on what area of the profession you might intend to be in; I can think of a few that may well require a degree qualification in addition to CMIOSH and the diploma or equivalent. If you are a member of IOSH you will have no doubt read SHP; the back section will often indicate what and why specific qualifications and relevant experience are requested. Good luck with the exams;-) CFT
Admin  
#5 Posted : 20 May 2008 16:50:00(UTC)
Rank: Guest
Admin

Posted By Pete Longworth Fortunately Charlene, as it stands at the moment, there aren't many employers that require a prospective employee to hold a degree in H&S. A quick trawl through the SHP magazine or some of the recruitment sites will show you that employers are generally looking for either holders of the diploma or in some cases the NGC. I also believe that most employers will consider NVQ4 holders (employer ignorance rather than denigrating NVQ4 makes the differentiation). There has been much debate, especially on the members forum, as to whether a degree (MSc or higher) should be the minimum qualification. My view is that would exclude rather than include people and would only serve to limit the opposition in the market place for those who put forward that view, but maybe I'm just a cynic.
Admin  
#6 Posted : 21 May 2008 00:05:00(UTC)
Rank: Guest
Admin

Posted By Mike Miller Charlene No a degree is not necessary, Only lots of experience in your current profession or industry whatever that may be. However I do believe that the safety profession is heading in that direction fueled by ignorance of employers who think that qualifications are end all and be all. Whilst qualifications are important there is no substitute for experience. There are a few people i know who have worked in safety over 30 years and do not have a piece of paper to their name and I couldn't hold a candle to them they are so good. Prospective employers constantly asking for degree's is why we seem to be getting many NGC entry level people on this site almost suicidal after many attempts to pull an interview. The hype is killing off potential newcomers to the industry. Good luck with you studies, stick with what your good at and you will be fine. see you on the circuit sooner rather than later!
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.