Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 26 September 2001 10:18:00(UTC)
Rank: Guest
Admin

Posted By Kevin Edwards Could anyone out there help me? At what voltage, does low voltage move to high voltage? Thanks in advance for your help. Regards Kevin
Admin  
#2 Posted : 26 September 2001 11:54:00(UTC)
Rank: Guest
Admin

Posted By Laurie I seem to remember that a voltage officially becomes a "lethal" voltage at 50 v dc and 30 v ac, but I'm not a speialist in this area Laurie
Admin  
#3 Posted : 26 September 2001 12:03:00(UTC)
Rank: Guest
Admin

Posted By Denis Hands According to the 16th Edition of the IEE Wiring Regulations, low voltage is any voltage above extra low voltage but not exceeding 1000V a.c. or 1500V dc (between conductors) or 600V a.c. or 900V dc (between a conductor and earth). Although there is no definition for 'high voltage' I would assume that by implication, high voltage must be any voltage above these values. I hope this helps
Admin  
#4 Posted : 27 September 2001 08:37:00(UTC)
Rank: Guest
Admin

Posted By Jane Blunt There is no strict definition of high voltage, as you may guess from the two previous correspondents. You need to decide why you are defining a high voltage - if your definition is to be used to help divide equipment, etc, into those items unlikely to pose a threat of death, and those that are potentially lethal, then the first correspondent is nearer the mark. Ordinary mains voltage in the UK, 230/240 V AC can be positively lethal, and yet it comes under the IEE description of low voltage. AC and DC have different effects on the human, and we can withstand a somewhat higher DC voltage, in most cases. Other definitions of high and low voltage appear to be more to do with the difficulties in insulation, switching, and problems with arcing, etc. That is, technical problems, not directly concerned with the safety of human beings. When looking at the safety aspects of electricity, do not forget that even a very low voltage source, if it is capable of delivering a lot of current (e.g. a power supply for an electromagnet), can be a source of fire. The effects of electricity are complex, because there are the effects of both the voltage, which shocks, and the current, which can heat things up. We can be killed by either, I believe. Electricity also has some bad habits, because it is possible for it to paralyse our muscles so that we cannot let go, and cannot breathe. Regards Jane
Admin  
#5 Posted : 27 September 2001 09:19:00(UTC)
Rank: Guest
Admin

Posted By Nick Higginson I work in the electricity supply industry, and as far as we're concerned, LV becomes HV at a 1000 Volts. Nick
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.