Posted By Haroon Rasheed Tabani I have been assigned to establish the procedure for portable pressure equipment, their inspection, pressure test. kindly can anyone of you let me know have you ever come across such work, if so do let me know the procedure or Technical info sheets and legal requirements like ASME or BS code for that. And at least let me know from where I can get such info. if possible can you send me spacimen of the test certificate. I will be thankfull to you

Posted By George Wedgwood Haroon, I agree with Robert and thank to him for having the courage to spell it out for you. I am a specialist in this field and have written on the subject for Croner Publications. Robert is correct in that 'portable' equipment has to me managed just as diligently as large boilers and both requirea defined 'Competent Person' to wirte a scheme of examination for the system. It is complicated work and usuially required a degree in mechanical engineering or similar, with a lot of experience. The best source of advice for you will probably come from your engineering insurers or if you have none, call Royal Sun Alliance Engineering insurance, and they will help. Failing all that, I could be available for a fee after 1st January to advise accordingly. My email is gaw@pgen.net. Good luck and don't allow portable pressure equipment on your site without a valid certificate of test and insurance! Regards, George Wedgwood CEng FIOSH