Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error
high-pressure water jet cleaning
Options
Go to last post Go to first unread
Previous Topic Next Topic
Admin  
#1 Posted : 22 February 2002 10:42:00(UTC)
Rank: Guest
Admin
Posted By Jim Evans I am looking for information on the safety requirements for using high-pressure water jet cleaning equipment. Our company uses contractors for this activity quite often and I would be interested to know if there is any ACOP or specific regulation that they/we should be complying with.
Back to top
Admin  
#2 Posted : 22 February 2002 12:17:00(UTC)
Rank: Guest
Admin
Posted By Diane Warne Jim, if you search this forum and maybe the old one too, you will find answers from when a similar topic was posted before.
Back to top
Admin  
#3 Posted : 22 February 2002 18:04:00(UTC)
Rank: Guest
Admin
Posted By STEVE Hi Jim Might be able to help you, I am the safety officer for my Company and deal with all the H/P Jetting that we are involved in. We have just completed a contract that involved decontamination of low scale activity of radioactive steel. YES! The H/P Water Jetting Assc. have an ACOP albeit Voluntary, however this is backed up by the HSE. Feel free to e-mail me personally for more info if required. Steve
Back to top
Admin  
#4 Posted : 23 February 2002 16:03:00(UTC)
Rank: Guest
Admin
Posted By Peter J Harvey Try the Pressure Systems Safety Regulations 2000
Back to top
Admin  
#5 Posted : 25 February 2002 13:17:00(UTC)
Rank: Guest
Admin
Posted By Andy Hi Jim, Hope you don't mind Steve, could not reply to you directly your e-mail address being hidden. Tried to find the H/P Water Jet Assoc. No luck. Any info? WWW? Tel etc Also, is the ACOP free/digital. Thanks and regards Andy.
Back to top
Admin  
#6 Posted : 25 February 2002 14:26:00(UTC)
Rank: Guest
Admin
Posted By Joe McNicholas Try this link: http://www.waterjetting.org.uk/ There is some safety info as well as some codes of practice that you can print off. If you need any further info please e-mail me as I used to be a contractor working with high pressure water (appx 3,500 psi at 12 gallon a minute). joe.mcnicholas@centers.co.uk Regards Joe
Back to top
Admin  
#7 Posted : 25 February 2002 16:16:00(UTC)
Rank: Guest
Admin
Posted By Nicky Try http://www.hse.gov.uk/pubns/indg68.pdf Its off the HSE site, I haven't looked at it but it may help. (Under work equipment in the hazards list) regards Nicky
Back to top
Admin  
#8 Posted : 26 February 2002 17:35:00(UTC)
Rank: Guest
Admin
Posted By STEVE Hi Jim-Andy SORRY ABOUT NOT MAKING E-MAIL AVAILABLE sbooth@ntlworld.com I have experience in 3,500Psi Hot/Wash units- 30,000 Psi units. Both sets of safe systems of work need to be addressed differently due to the hazard risks being vast. Steve
Back to top
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET