Rank: Guest
|
Posted By Richard Perry
I'm looking for clever solutions to access along the valleys of an asymmetric northlight roof. Glass on one (steep) side, Corrugated asbestos cement on the other. Gutter is strong and would bear a load.
No access for cherry pickers and we'll need more than just fall arrest.
|
|
|
|
Rank: Guest
|
Posted By Bob Pedley
Hi Richard,
I have seen some neat small platforms for assembly over machinery and the like from Turner Access. They are very approachable when it comes to helping with access solutions in awkward places. Their contact numbers and address are on www.turner-access.co.uk
Hope this helps
|
|
|
|
Rank: Guest
|
Posted By Ken Taylor
This is probably the sort of question that is impossible to answer at a distance. Presumably the glass won't be safety glass either. I would expect that some combination of barriers (temporary or permanent), fall-restraint with fixed safety line and anti-slip flooring to the gutter may be the way forward. We have a number of interesting gutters on our historic buildings and have had to revert to various access solutions - all very site-specific. Inviting a specialist company to visit and put forward proposals has always proved invaluable but you do need to discuss these with the operatives concerned who will be working there.
|
|
|
|
Rank: Guest
|
Posted By Richard Perry
Thanks Ken and Bob for those replies,
I was anticipating going to a specialist - I was wondering whether anyone had any recommendations - maybe companies they'd found particularly helpful.
I've been pointed at HSG33 which had slipped my mind - some good ideas in there if anyone is tackling similar issues.
Richard
|
|
|
|
Rank: Guest
|
Posted By peter gotch
Richard,
The HSE guidance to which you refer shows a proprietary system which spans across both slopes.
In terms of natural lighting, particularly on the glazed side, the same principle could be extended to providing protection via a multiple guard-rail frame
Someone would of course need to check that the purlins or astragals supporting the glazing and roof sheets are suitable for any additional loading.
Presume that the roof predates CDM - otherwise perhaps you might ask the designers why they have not facilitated your compliance with Reg 13 of Workplace (HSW) Regs perhaps pointing out the implications of Section 36 of HSW Act to them and the words "Professional Indemnity Insurance".
Regards, Peter
|
|
|
|
Rank: Guest
|
Posted By Ken Taylor
I have just picked up your reply upon my return to the office.
We have used Online Safety (in Reigate, Surrey) satisfactorily for a number of jobs over the past 5 years. An advantage of using this type of contractor is that they have access to a range of products and are not tied into one particular system.
|
|
|
|
Rank: Guest
|
Posted By Bob Pedley
Hi Richard,
The companies I have used are Turner Access working with Hewden Hire.
Bob
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.