Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 03 September 2003 11:43:00(UTC)
Rank: Guest
Admin

Posted By CJ We have an ongoing problem of students slipping whilst getting out of the shower trays. We have installed anti slip trays (which should have solved the problem), flooring and matting for outside the showers and I am not sure what else we can do except improving the warning signs. No anti slip mat can be put inside the shower tray due to the uneven surface of the particular brand. I was wondering if anyone else has dealt with this kind of thing successfully? Also how liable would we be if an accident happened, bearing in mind the improvements that have been made? I'm getting to the opinion now that they are just being careless, under the influence of alcohol or in a rush and no matter what improvements are made sometimes accidents happen. Any advice would be appreciated.
Admin  
#2 Posted : 03 September 2003 12:58:00(UTC)
Rank: Guest
Admin

Posted By Linda Crossland-Clarke Hi The MOD all use "flip flops" in their communcal showers, this will help with slipping and against fungal/viral infections I suspect. Linda
Admin  
#3 Posted : 03 September 2003 13:39:00(UTC)
Rank: Guest
Admin

Posted By Ian Bruce CJ, I went through similar pain a couple of years ago when we had prisoners slipping in the showers. We had what was allegedly anti slip surfaces applied to the showers during construction, but the grit component was of a small dimension and when wet and especially with shower gel/shampoo, it really was quite slippy. There was also a problem as you exited the shower bund and stepped onto the living unit floor - polished epoxy coated concrete - again slips were common. The solution we came up with was a high grit component surface coating on a fibreglass substrate panel that was bolted to the existing floor and sealed around the edges with a mastic product. Not very comfortable, but we didn't want them spending too long in there anyway, if you get my drift! We did consider matting products but these would require regular cleaning/disinfection routines that would have been difficult to effect and keep up. Originally we did issue all prisoners with flip flops as the other respondent has mentioned, however, in another prison, using the same flip flops, a prisoner slipped and fell and the blame was firmly attached to the flip flop, it was found to not be suitable as a regular use piece of footwear and the prison ended up paying compensation to the individual concerned. I'm sorry, can't remember too much detail on this one, but I know it cost them a lot of money and credibility. Hope this helps.
Admin  
#4 Posted : 03 September 2003 21:35:00(UTC)
Rank: Guest
Admin

Posted By Robert M Edwards The law asks for the 'taking all reasonable precautions' so non slip flooring which can be applied to the surface involved will need to be looked at. Replacement flooring if needed will have to be considered. In addition look at the drainage and the surface they step out onto. Also warning notices of the fact it is slippery will help mitigate in the event of a horse play event ( not the same in legal terms as a UCTA disclaimer).
Admin  
#5 Posted : 04 September 2003 14:04:00(UTC)
Rank: Guest
Admin

Posted By Bryn Maidment "prisoners slipping in the showers" - ROTFLMAO! Is that the Prison Service equivalent of the Police "they fell down the stairs" ? I was going to mention flip-flops but Linda beat me to it. On reflection, flip-flops were OK in the flip-flop / deck (floor) interface but were badly let down by the poor foot / flip-flop interface i.e. the footwear stayed glued to the deck but ya foot slipped sideways with the 'thong' piece always managing to sever the piece of skin betwixt the big toe and it's neighbour. This was more acute when the ship rolled and was sometimes accompanied by a head / grey painted metal box interaction. The RN used to make great use of decktread strips outside showers so the rough flooring mentioned by other respondents is probably the way to go.
Admin  
#6 Posted : 04 September 2003 20:07:00(UTC)
Rank: Guest
Admin

Posted By Arthur Hendry Paterson Well well well. CJ Here we have it. Students slipping out of showers. Mith has that they do not even slip in to them. Anyway we won't go there. You asked a question about liable. You would have to prove the student was neglegent in the first instance. You may appear to be operating a safe system mats etc. I am no floor expert or even on anti slip methods, it may be worth asking someone who deals with this sort of thing as a trade. It could save you a large compensation claim at a later date.
Admin  
#7 Posted : 05 September 2003 07:58:00(UTC)
Rank: Guest
Admin

Posted By Jane Blunt Another thought. I visited a University campus this summer and stayed in their accommodation. The shower tray was several centimetres above the level of the floor outside, and I felt it necessary to take extreme care stepping out with wet feet to a lower level. In these circumstances stepping down is much more dangerous than stepping up. I would have appreciated a handle or rail to grab hold of. Jane
Admin  
#8 Posted : 05 September 2003 08:38:00(UTC)
Rank: Guest
Admin

Posted By Hilary Charlton I think grab rails are a brilliant idea - there is no reason for anyone to slip. I once slipped getting into a bath in an hotel in Paris - I broke two ribs. This was purely because it was a 5 star hotel and the bath was polished to a high sheen (as they are), there was no anti-slip surface and no grab rails otherwise the accident would not have happened. Not only are grab rails an excellent idea, they are a cheap idea which is always positive. Hilary
Admin  
#9 Posted : 05 September 2003 08:50:00(UTC)
Rank: Guest
Admin

Posted By CJ Jane, It looks like that is the problem, the shower trays are much higher than the surrounding floor, because of this it seems their back feet are slipping while exiting the tray. We've had about 5-7 incidents in the last 3 years, 2 of them reasonably serious, I don't know if that is an acceptable number considering we have approx 700 students and big changes would cost ££££££££. I think whatever I do this problem will still exist to a certain extent, nevermind. Thank you all for your advice, CJ.
Admin  
#10 Posted : 05 September 2003 13:15:00(UTC)
Rank: Guest
Admin

Posted By Allan St.John Holt Go for the grab handle or rails - think DDA if you need a backup reason! Allan
Admin  
#11 Posted : 05 September 2003 14:45:00(UTC)
Rank: Guest
Admin

Posted By Jane Blunt And in future builds how about specifying that the shower floor and the changing area are at the same level? Stepping down is always going to be dangerous, whether it is into or out of the shower tray. Jane
Admin  
#12 Posted : 03 December 2003 15:35:00(UTC)
Rank: Guest
Admin

Posted By P Shepherd There is a treatment called Posigrip which can be used to treat most hard surfaces and which improves the slip resistance of wet surfaces to at least the level of the dry surface.
Admin  
#13 Posted : 04 December 2003 09:25:00(UTC)
Rank: Guest
Admin

Posted By Ken Taylor Is someone cleaning these things properly (the shower trays, not the students). We install a perpendicular grab-rail from floor to ceiling at the entrance to shower cubicles for our elderly residents and I suspect that students would equally benefit from one of these. Much of the modern student accommodation one sees these days has 'wet rooms' (containing shower, WC pan and wash-basin) with continuous floors falling to drainage without steps or bunds. I dislike them personally (the rooms not the students) but they may help with your problem.
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.