Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 14 November 2003 08:40:00(UTC)
Rank: Guest
Admin

Posted By Ian Stone I was called by a friend who has been having a difficult time with his bosses, he works in a bakery where they produce pastries etc, one of their ovens is being decommissioned, on a recent visit he noticed on top of the oven a small board that had come away from the oven. The oven is known to contain asbestos. The sheet was from the same area that the sample had been taken. Looking at the dust gathered on top this sheet had been on top of the oven for some time. Also where a pipe had been removed a large amount of fibrous material was showing. As H&S officer for the company he advised that the room be closed to staff (due to the work it was being used for a restroom until completed) and sealed the top of the oven with plasic sheeting and has arranged for contarcators to come in and remove the sheet etc. His bosses have said he has gone over the top and the sheet has been their for years and also theres no proof that it is asbestos sheeting. They have been quite agressive towards him. I advised that if he feels it to be asbestos, as its come from a known area of tested asbestos then he has done the right thing and to wait for the contractors to test and remove and clean the area. Any thoughts would be great Ian
Admin  
#2 Posted : 14 November 2003 18:43:00(UTC)
Rank: Guest
Admin

Posted By Ken Taylor Without seeing the item and from the information supplied, it sounds as if your friend has done the right thing in the short term. A competent person needs to inspect this, determine the risk and a course of action to be taken. Where a substance is considered to possibly contain asbestos it needs to be treated as such until any sampling and testing undertaken have determined otherwise. Are the employers aware of current legislation and HSE, etc guidance on asbestos in the workplace?
Admin  
#3 Posted : 14 November 2003 21:29:00(UTC)
Rank: Guest
Admin

Posted By Stuart Nagle Ian. Asbestos dusts are the exactly the problem. If as stated above this is a known area of asbestos, then fibres and dusts resembling such along with bits of suspect sheet materials should be treated with suspicion, especially when they are open to the atmosphere and in areas that are frequented by employees. The right action would have been to isolate the area and prevent access, notify a competent person and get sampling/analysis done. based on results of this take the appropriate action.... So it appears you have done th correct thing and carried out these actions. I can understand the reaction of the employer, and this can be overcome by advising and extolling the virtues of the action in ensuring their legal compliance and acting to prevent both harm to employees and of course themselves through the courts.... I am sure a reasonable explaination of this will result in an acepatnce of the situation and realisation that this was the right and proper action to take...
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.