Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted: : 15 September 2004 08:45:00(UTC)
Rank: Guest
Admin

Posted By Eamon Murtagh I am looking to find a safety standard for Termoplastic Roof Lights. I have been asked is there a safety standard for these which would allow them to be walked on in accessing a work area. I have expressed the opinion that these cannot be walked on under any circumstances.
Admin  
#2 Posted : 15 September 2004 14:12:00(UTC)
Rank: Guest
Admin

Posted By Ken Taylor I would treat all such as fragile and use protective measures. However, you could consult Appendix 4 to HSG33 and HSE Specialist Inspector's Report No. SIR30. Even if designed to support the weight of a person, the unknown factors will include UV degradation, impact, chemical or heat damage and corrosion to supports or fixings.
Admin  
#3 Posted : 15 September 2004 14:45:00(UTC)
Rank: Guest
Admin

Posted By peter gotch see ACR(M)001:2000 Test for Fragility of Roofing Assemblies (2nd Edition) NFRC 2000 comments above re eg weathering still relevant ! Regards, Peter
Admin  
#4 Posted : 15 September 2004 15:12:00(UTC)
Rank: Guest
Admin

Posted By Karen Todd Hi Eamon, Safety rooflights are now widely in use, although sunlight degrades them. I believe that 20-30 years is the range for non-fragility, but the manufacturer would be better able to advise. I know I never walked over rooflights - safety rooflights or not, but I am the kind of person who won't even walk over a manhole cover and have been told I will never make a roofer (i.e. I don't take risks)!!! The BS for rooflights is BS EN 1013 I think. I've sent you a picture of safety rooflights, and also a copy of the Advisory Committee for Roofwork's Best Practice Guide, which states, "Before commencing any work on any existing roof it is absolutely essential that you find out whether your roof is fragile or non fragile. This is a key decision, which should only be made by persons competent to do so. If there are any doubts, assume that the roof is fragile". Regards, Karen
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.