Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 20 February 2006 16:24:00(UTC)
Rank: Guest
Admin

Posted By William lawlor The Pressure Systems Regs state that equipment that raises steam at any pressure comes under the Regs. Would you expect to see a written scheme of examination for a commercial wall paper stripper or large cappuccino type coffee machine (milk heater and frother)?
Admin  
#2 Posted : 20 February 2006 16:33:00(UTC)
Rank: Guest
Admin

Posted By Descarte Does it not also state Pressure in Bar x Internal Volume in Litres = B L If B L is less than 250 you will not require a WSE for the pressure system, though safe operating limits, safe operation procedures and maintenance schedules are still required.
Admin  
#3 Posted : 21 February 2006 07:34:00(UTC)
Rank: Guest
Admin

Posted By Jane Blunt The 250 bar litre threshold does not apply to steam. I suggest you contact the insurance company that insures your other pressure equipment or the engineer who inspects it. Without knowing how the pieces of equipment you mention work I cannot comment further. Some of our coffee-making equipment needs inspection, some does not. Regards Jane
Admin  
#4 Posted : 21 February 2006 11:38:00(UTC)
Rank: Guest
Admin

Posted By Descarte OK then, does it not also state that pressure systems exempt from the regulations includes: 25. "any part of a tool or appliance to be held in the hand which is a pressure vessle" Though it also says "steam strippers where the steam is generated in a tank are not exempt from these regulations" So I guess it would depend on the type/make/model? Not too familiar with steam strippers, but I guess this at least means my iron does not need a WSE ;-)
Admin  
#5 Posted : 21 February 2006 17:46:00(UTC)
Rank: Guest
Admin

Posted By Frank Hallett Hi descarte Your iron may need to comply if you use it at work [as an iron], especially if it's one of the modern ones with a large seperate steam generator and works at the right pressure [BxL of steam generator not water reservoir]. Commercial steam machines as used in laundries and cleaners often fall within the criteria. Frank Hallett]
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.