Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 12 May 2006 16:31:00(UTC)
Rank: Guest
Admin

Posted By Derek Rooney MIOSH MIIRSM Hi Ladies and Gents Looking for a little bit of guidance if possible, i work in the motor industry and as you can expect have a major issue with noise in the workplace. Under the old Regs the following exposure times were in place; dB(A) Exposure 85 8 hours 88 4 “ 91 2 “ 94 1 “ 97 30 minutes 100 15 “ 103 7.5 “ 106 3.75 “ However i can't seem to find any similar guidance under the new regs can anyone point me in the right directions as to what these exposure limits will now be? Any help will be greatly appreciated Thanks Dez
Admin  
#2 Posted : 12 May 2006 16:43:00(UTC)
Rank: Guest
Admin

Posted By Robert K Lewis Derek The guidance you were looking at was based around a 3 dBa rise giving a doubling of the sound pressure. Thus if you start at the new equivalent to the old 85, ie 80 dBa then you get: 80 - 8 hours 83 - 4 hours 86 - 2 hours 89 - 1 hour etc etc But do remember that if the weekly exposure is 87dBa, after accounting for hearing protection used, then you must review everything in your control measures to ensure that it is brought below 87 dBa, on a weekly personal exposure. At 85 hearing protection must be supplied and used. Together with other control measures including noise protection areas if other controls cannot be used. Bob
Admin  
#3 Posted : 13 May 2006 10:43:00(UTC)
Rank: Guest
Admin

Posted By PaulA Derek... Go onto the HSE website and there is a fantastic calculator that soes all the hard work for you.. it is downloadable too. Regards PaulA
Admin  
#4 Posted : 18 May 2006 16:37:00(UTC)
Rank: Guest
Admin

Posted By Derek Rooney MIOSH MIIRSM thanks Guys, i think i'm on the right track now! But trying to get guys to wear hearing protection when using air tools with noise in excess of 95dba is a nightmare. Maybe its a macho thing :)
Admin  
#5 Posted : 18 May 2006 16:48:00(UTC)
Rank: Guest
Admin

Posted By Robert K Lewis This is the time you need to start getting formal about the use of HP. I rather think the HSE will soon query why you are not enforcing the issue with appropriate management actions. Bob
Admin  
#6 Posted : 18 May 2006 18:06:00(UTC)
Rank: Guest
Admin

Posted By Martin Monaghan Agree with Bob, but don't forget HP should be the last resort and you should be looking at other ways of reducing exposure. E.G. quieter tools, reduced exposure time etc. Martin.
Admin  
#7 Posted : 18 May 2006 20:59:00(UTC)
Rank: Guest
Admin

Posted By Michelle Wilson Take them into a meeting, insist they wear earplugs in the meeting, tell them about the risks and impacts of hearing loss, then ask if everyone heard what yu were saying. That should demonstrate to them the potential consequences of not wearing HP. Ear plug attenuation approximates to level of hearing loss likely to be experienced over time!
Admin  
#8 Posted : 23 May 2006 12:01:00(UTC)
Rank: Guest
Admin

Posted By MICK MEAD, CMIOSH having just been involved in a case, please can i suggest you do the training already recommended (how noise affects hearing; types of protection; aquisition, repairs, replacements; hygiene aspects; storage; where the noise zones are etc - but, importantly, get every attendee to sign a receipt of attendance and UNDERSTANDING of the requirements. Mick
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.