Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 18 September 2006 16:58:00(UTC)
Rank: Guest
Admin

Posted By Austin. U
Hi All,
Please does anyone know where the fire-protected area is usually located near a passenger hoist on site.There is an electrical requirement for a new hoist which states that a secondary emergency supply shall be in a fire protected area at least equivalent to the fire protection of the lift well.

A.U.
Admin  
#2 Posted : 18 September 2006 20:34:00(UTC)
Rank: Guest
Admin

Posted By Richard Altoft
New one on me I must admit, does it mean you have to build a cupboard or protected shaft to protect the secondary supply ?????????? Is it so that if a fire takes out the first supply the lift can still be brought down safely as without power the lift would presumably "lock up" or "fail without danger". What make is the lift and whose codes do you think it was written under. ?? USA?? german?? Japanese??
Is it really intended for site use or is the manual written for pernmanently installed lifts??
Sorry to ask questions but it is my way of opening up the problem.
R
Admin  
#3 Posted : 19 September 2006 00:16:00(UTC)
Rank: Guest
Admin

Posted By Ken Taylor
This sounds a bit like a foreign standard for the use of the hoist for evacuation in the event of fire. In the UK we would require a secondary separate and protected power supply for evacuation lifts above two storeys.
Admin  
#4 Posted : 19 September 2006 11:26:00(UTC)
Rank: Guest
Admin

Posted By Austin. U
Please permit me to rephrase my question:What is the meaning of a fire fighting area and where can the power supply cable be installed for a fire fighting lift?

Many Thanks,
A.U.
Admin  
#5 Posted : 19 September 2006 20:54:00(UTC)
Rank: Guest
Admin

Posted By Ken Taylor
In the UK, a fire-fighting lift in a building is primarily for the use of the fire brigade - although it may be used to evacuate disabled persons by management prior to the fire brigade taking control. If this is what you are interested in, you should consult your local fire officer. An evacuation lift (for use by building management to evacuate disabled persons) may be to a lesser standard than a fire-fighting lift and should conform with BS5588-8:1999 - which gives information on the types of power supply that may be used and the need for fire separation.
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.