Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 20 November 2006 20:33:00(UTC)
Rank: Guest
Admin

Posted By srd We have a two man 'cradle' that we use for the internal cleaning of windows in a large / high hall. The 'cradle' is suspended from a bar running along the top of the hall walls, and can be made to raise / lower and travel sideways by the two operators. The two men are prevented from falling out of the cradle by the wearing of a belt restraint. Is this all that is required, or should we be using some type of fall arrest equipment, and if so how would this help, as if the cradle were to fall to the ground it would take the men with it as they are strapped in? Stephen.
Admin  
#2 Posted : 21 November 2006 08:00:00(UTC)
Rank: Guest
Admin

Posted By Howard I would have to ask myself if there was a component failure of the system which led to the cradle tipping,but not falling to ground level, would the belt restraint then be suitable?? I would suggest probably not.
Admin  
#3 Posted : 21 November 2006 08:49:00(UTC)
Rank: Guest
Admin

Posted By Mike Draper Stephen I would have thought that the cradle constituted lifting equipment for lifting persons and was therefore subject to regular thorough examination. This is also one aspect of your fall prevention strategy. Given then that the workers are in a cradle which has guardrails all round, if they are correctly anchored then they are practically prevented from falling out of the cradle, aren't they? However if they can still fall outside of the cradle despite the guardrails and the restraint, then perhaps you need to do so more work. Mike
Admin  
#4 Posted : 21 November 2006 09:03:00(UTC)
Rank: Guest
Admin

Posted By brian mills you have someting in the mail regards Brain
Admin  
#5 Posted : 21 November 2006 09:08:00(UTC)
Rank: Guest
Admin

Posted By Robert K Lewis We need to remember that the reason for the harnesses in this situation is to stop falls of persons in the following situations Unpredicted movements of the cradle due to failure of lifting parts or electrical faults Failure of suspension parts leading to the cradle becoming suspended at a steep angle. In both scenarios there is a possibility of suspension although with short restraint lanyards this is not likely. The operatives are therefore able to self recover the level of the cradle using the manually operated controls for the cradle. They should however be using a full harness for this rather than a belt. This ensures that they are held vertically upright, which is highly unlikely with a belt. The catastrophic collapse of the cradle is however a scenario that can only be minimised through proper maintenance, inspection and testing of all parts including the track. Operatives cannot be affixed to the building unless you have a fifteen minute rescue plan, even then the HSE would see this as an admission that your maintenance regime does not have your full confidence. The failures I have seen have been due almost exclusively from a total failure to inspect and test the equipment regularly. I have seen only one electrical failure giving problems in over 25 years and this was overcome by the operatives. Bob
Admin  
#6 Posted : 21 November 2006 09:53:00(UTC)
Rank: Guest
Admin

Posted By Salus Hi srd, i think fall arrest devices should conform to BS EN 361. I do not think a belt would comply, more of a work restraint, than fall arrest. HTH
Admin  
#7 Posted : 21 November 2006 19:45:00(UTC)
Rank: Guest
Admin

Posted By srd Thanks all for your replies, and to Brian for sending some helpful attachments via email. Stephen.
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.