Rank: Guest
|
Posted By GARRY WIZZ
Safe use of work eqpt & PUWER are familiar ground. However we are planning on placing some cooling units onto a flat roof next week.
The only way they can be positioned is by the use of a crane.
As I have not called on a crane before, if you should be inclined to voice (write)any directional pointers that would be of help, it would be appreciated.
Thanks
|
|
|
|
Rank: Guest
|
Posted By MAK
Hi Garry,
you need to refer to LOLER 1998 see reference below:
http://www.opsi.gov.uk/si/si1998/98230702.htm#3
These regulations stipulate measures required for lifting operations. basically you will expect the lifting contractor to supply a Lifting plan, this will contain a berthing plan i.e where the crane will be situated, it will contain a Risk assessment for the operation and a method statment. the plan iwll also contain the name of the banksman and the trained operative.
If you are the person who must review such documents, ensure it is specific to your site, contains acknowledment of the conditions it will be placed in i.e traffic, barriers, even ground etc.
You can always check HSE web also:
http://www.googlesyndica...ifting+operations&safe=o
PS, you will have operatives working on a flat roof, check weather conditions, wind speeds and that there is a suitable fall protection system in place also.
|
|
|
|
Rank: Guest
|
Posted By holyterror72
BS 7121-5:2006 is invaluable if you can get it. It outlines procedures, operator requirements, what risk assessments are required, method statements, lifting plans, etc and is relatively easy to understand.
|
|
|
|
Rank: Guest
|
Posted By Chris Pope
See if you can find a reputable crane company in your area and ask them to price for a contract lift. In your situation this is following HSE advice. The crane company supply everything that is needed and will insure the load and all aspects of what could go wrong. You will have a lifting plan prepared by them.
You pay a premium for this service but it it the best way of ensuring and insuring the problem is dealt with properly
|
|
|
|
Rank: Guest
|
Posted By RichardJ
As well as LOLER, you may be into CDM!
|
|
|
|
Rank: Guest
|
Posted By Terry Jones
Hello Garry
You will get your answers here, and more. It's a forum website designed especially for questions such as yours
www.lifting-world.co.uk
|
|
|
|
Rank: Guest
|
Posted By GARRY WIZZ
Thanks for the input
|
|
|
|
Rank: Guest
|
Posted By Bob Youel
this sounds like a CDM job
use specialists that's what they are there for
your insurers would not be happy if you did not use competent people
there are not many independent crane operators who would work to any old plan
|
|
|
|
Rank: Guest
|
Posted By alex mccreadie
It is BS 7121 Part 1 you need not Part 5 which is Tower Cranes also LOLER. But as mentioned get a reputable company to carry out a Contract Lift. You still have responsibilities but the Crane company should advise you of these.
Ta Alex
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.