Rank: Guest
|
Posted By Merlin
Over the last six months we have put together in-excess of a dozen or so applications for full and partial road closures for a variety of reasons i.e. sighting of large cranes, jointing into sewer systems in the centre of the road, lay down of new services etc
We have supplied detailed drawings out lining what is required such as signage and where they will be sighted
A new employees has joined the local council highways department, only now he is asking for in our documents to show exactly the sign to be used.
Well I have down loaded some but need more j-peg pics of road signs can you help my eyes as going blurred trawling through the web trying to find the right signs does any one know of a good web site or CD with all the road traffic signs I would ever likely to need or use
Thanks for any help merlin
|
|
|
|
|
|
Rank: Guest
|
Posted By Merv Newman I understand that the highway code now lists and features 129 different sings.
There is also a compaign, originating in Germany I think, to reduce the quantity of signs.
Merv
|
|
|
|
|
|
Rank: Guest
|
Posted By Bob Youel
the average motorist / pedestrian would not recognise half a dozen signs nor adhere to any of them
we recently had a wheel chair user stuck in blacktop because they had disregarded the signs and moved barriers
|
|
|
|
|
|
Rank: Guest
|
Posted By David B Merlin Have a look at the "Traffic Signs Regulations and General Direction" on DfT website, www.dft.gov.uk for all prescribed signs in Great Britain.
|
|
|
|
|
|
Rank: Guest
|
Posted By Robert Paterson Have emailed direct to you
Robert Paterson
|
|
|
|
|
|
Rank: Guest
|
|
|
|
|
|
|
Rank: Guest
|
Posted By Robert K Lewis Merlin Just feel lucky that this was not picked up earlier. Your detailed drawing should always have specified sign, additional wording when relevant and location in any case. The requirement had been overlooked by previous officers. There is a good package available now to do these layouts, the following is typical http://www.conesoftware.com/uk/home.htmand many contain all the standard signs you are likely to require. Bob
|
|
|
|
|
|
Rank: Guest
|
Posted By Merv Newman Don't forget the one that shows frogs mating. "slippery road ahead"
And I was always amused by the sign showing two old people crossing the road. At a place called "cripple creek"
Sorry if that manages to offend some people Just my sideways sense of humour.
OK. It's 12.45 (my time, not necessarily yours) I think I need a few calories.
Merv (does a G&T represent a balanced diet ?)
|
|
|
|
|
|
Rank: Guest
|
Posted By Merlin thanks for all this information
as i said before drawing up a plan and identifying the type and where to place has been ok but now they would like a picture of the sign on the plan where it is to be placed and any wording appropriate
which i have done but not with a picture
thanks again
Merlin
|
|
|
|
|
|
Rank: Guest
|
Posted By RP See www.streetworks.fsnet.co.ukYou will need to refer to Safety at Streetworks and Road Works ACOP and chapter 8 of the Traffic Signs Manual...
|
|
|
|
|
|
Rank: Guest
|
Posted By David Bramall Merlin - OK some of the responses underestimated your ability but I am pretty sure that people are trying to help. If you DO CARE to look at some of the sites mentioned and determine the cost (or not) of using images it may be the answer.
Or - as I have been forced to do in the past design your own little drawings based on the "proper" signs.
Not totally accurate but OK - last word of warning - beware anything that isnt included in TSRGD (DfT) - they may not be allowed
|
|
|
|
|
|
Rank: Guest
|
Posted By David Bramall Plus - you dont even need a drawinf if you provide the sign reference
|
|
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.