Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

IOSH Forums are closing 

The IOSH Forums will close on 5 January 2026 as part of a move to a new, more secure online community platform.

All IOSH members will be invited to join the new platform following the launch of a new member database in the New Year. You can continue to access this website until the closure date. 

For more information, please visit the IOSH website.

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error
PAT TESTING
Options
Go to last post Go to first unread
Previous Topic Next Topic
Admin  
#1 Posted : 19 May 2008 12:54:00(UTC)
Rank: Guest
Admin
Posted By MICHAEL CRAWFORD
Please pardon my ignorance but can PAT testing damage a computer in any way?

Thanks for any help ,

Michael
Back to top
Admin  
#2 Posted : 19 May 2008 14:05:00(UTC)
Rank: Guest
Admin
Posted By graham cleator
Unless you have the correct testing equipment it is not advisable to carry out any voltage checks on computers to avoid damage to hard drives or onboard memories
I would advise doing visual checks only
Back to top
Admin  
#3 Posted : 19 May 2008 14:14:00(UTC)
Rank: Guest
Admin
Posted By Ian Gardner
It certainly can if done incorrectly.

A lot of PAT instruments nowdays are able to perform 'soft' versions of the electrical tests (ie. an earth bond test with a test current of 20-200mA rather than 25A; a protective conductor/touch current test rather than an insulation resistance test) that are designed for delicate & sensitive equipment such as IT.

Above all, the person conducting the tests should be sufficiently competant to know what tests are & are not appropriate for any given appliance, to minimise the risk of damage.
Back to top
Admin  
#4 Posted : 19 May 2008 14:14:00(UTC)
Rank: Guest
Admin
Posted By Smiff
The insulation test of a PA tester will use a high voltage that MIGHT damage IT equipment. For this reason the training courses for this kit advises against it's use on computers.
Back to top
Admin  
#5 Posted : 19 May 2008 14:34:00(UTC)
Rank: Guest
Admin
Posted By Ian Gardner
Any IT equipment that complies with BS EN 60950 ('Specification for safety of information technology equipment including electrical business equipment') will not be affected by a 500V insulation test. For all other IT equipment, one should perform the protective conductor/touch current test in its place.
Back to top
Admin  
#6 Posted : 19 May 2008 16:35:00(UTC)
Rank: Guest
Admin
Posted By GeoffB4
I would advise that in general office conditions it is not necessary to test a computer - visual inspection only is required.
Back to top
Admin  
#7 Posted : 19 May 2008 16:52:00(UTC)
Rank: Guest
Admin
Posted By Ian Gardner
The latest edition of the IEE Code of Practice recommends, for initial frequencies of inspection & test, for IT equipment in offices & shops:

Class I:
Formal visual inspection: 24 months
Combined inspection & test: 48 months

Class II:
Formal visual inspection: 24 months
Combined inspection & test: none

These are *initial* frequencies, and can be changed by the tester upon review and re-assessment.
Back to top
Users browsing this topic
Guest (2)
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2026, Yet Another Forum.NET