Rank: Guest 
|
Posted By MICHAEL CRAWFORD
Can anyone tell me if a company who build electrical control panels need to ce mark the panels? They think not because all the components are ce marked ,
Thanks for any advice ,
Mike
|
|
|
|
|
|
Rank: Guest
|
Posted By Ron Hunter In the first instance, if you have no intention of placing the finished assembly on the market, then you need not be concerned about compliance with the Low Voltage Directive (LVD) or CE marking. If the above is not the case, then there is NO PRESUMPTION of compliance UNLESS there is a SPECIFIC harmonised standard for the finished assembly and it can be demonstrated that it has been built in compliance with that Standard. Otherwise, a Technical File will have to be prepared (this may not be as onerous as it sounds). A good starting point for further guidance at: http://ec.europa.eu/ente...ment/lv/guides/index.htm
|
|
|
|
|
|
Rank: Guest
|
Posted By SteveD-M
Michael
Off the top of my head, the supply of machinery regulation 2008 are due in force Dec 29th. They include a section on partly completed machinery which forms the part of or to be incorporated in machinery to which the regulations apply. There are also some exemptions IF the requirements are met by compliance with another directive or regulation.
|
|
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.