Rank: Guest
|
Posted By Tanya Boyce
Our facillities people are wanting to put "danger hot water" signs above all hot water taps in a large building with many sinks.
Personally I find this a bit overkill as hot water taps generally contain hot water. I can see why you might use them on taps which are at extreme temperatures.
Can anyone tell me if there is any legisalitive reason for needing these signs at every hot water tap?
Thanks in advance.
|
|
|
|
Rank: Guest
|
Posted By A Campbell
May be something to do with ensuring they are aware of the difference in hand washing water temperature and other use water temperature?
|
|
|
|
Rank: Guest
|
Posted By Barrie (Badger) Etter
Tanya
We have them in our place and yes it is overkill but with the water at +50 deg C to kill off legionella, some individuals may feel its at scalding level. Therefore they have to be reminded (providing they see / read the signs in the first place) that the water may be hotter than they anticipate.
All comes down to political correctness &c.
Badger
|
|
|
|
Rank: Guest
|
Posted By martinw
Might be pre-empting the changes which happen in October to Approved Document G. If baths in new builds are to have thermostatic control it is only a metter of time before the same happens to hot water taps.
|
|
|
|
Rank: Guest
|
Posted By martinw
Metter? Should have checked!
|
|
|
|
Rank: Guest
|
Posted By Colin Reeves
Definitely overkill. Even Judith Hackett said that her washroom at the HSE had no such signs and she thought there was no need for them (Radio 2 about 2 weeks ago).
Too many signs, nobody bothers to read them Do NOT put them up, PLEASE!
Colin
|
|
|
|
Rank: Guest
|
|
|
|
|
Rank: Guest
|
Posted By Tanya Boyce
Thanks everyone. I think we will hold off for now and review again later
|
|
|
|
Rank: Guest
|
Posted By FAH
Hi Tanya
Just to underline the previous responses, there are so many situations where the use of a sign is definitely not the best way to manage the perceived hazard - this is one of them.
Those who use signs frequently fail to consider the following:-
Has the sign actually addressed the foreseeable exposure of ALL persons who may foreseeably come into contact with it?
Age, physical, physiological or mental disability etc all mitigate against any meaningful discovery and understanding of the sign.
Can it actually be seen by the intended user?
Can it be understood by the reader?
Just what does "hot" mean"?
Why haven't the owners of the hazard implemented a higher level of control as per MHSW Scedule 1 [for the UK]?
In a previous response, the issues of legionella was cited as a possible reason for not imposing built-in temperature controls. But, in my opinion, if implemented immediately prior to the point of discharge, they're very effective but do not adversely affect the legionella control [of high temperatures] beyond that of "reasonably practicable".
What has to be remembered at all times is that where one control measure may affect, or be affected by, another control measure; these control measures must be considered in a holistic RA that then enables a balanced outcome that shouldn't then generate a disproportionately higher level of harm without very thorough evidence to support it.
Frank Hallett
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.