Rank: Guest
|
Posted By Matt David
Is it 'best practice' to record daily visual checks? This is in addition to the recorded weekly checks.
Matt
|
|
|
|
Rank: Guest
|
Posted By Clare Gabriel
Few thoughts - Very much depends on why you are doing them, what would be involved in those checks and the level of awareness and training your employees have. Any such addition is always going to be of benefit but if they become onerous they will fall by the wayside and that can become another of the 'we used to do them but not anymore' whinges of employees. Some company's do it to try and remove some of their responsibility to put the onus on employees and that also can be seen straight through by employees (and has no place in law)
Visual checks on plant such as FLT's is essential and if you have a culture whereby thye are completed without fail then other checks may just fall into place.
Visual checks on electrical equipment is useful - damaged leads and plugs.
|
|
|
|
Rank: Guest
|
Posted By Steve Lane
if it is not recorded it did not happen, best practice in construction industry, record all inspections,
|
|
|
|
Rank: Guest
|
Posted By John Packer
It's going to be dependant on the nature of the plant and the findings of the risk assessment. OMHI forklift trucks should be inspected at least daily because they are mobile and thus every time they are moving there is a risk they will hit something. From an accountability point of view I would also carry out an unrecorded inspection if the operator changes during the day and report any defects found.
|
|
|
|
Rank: Guest
|
Posted By Robert K Lewis
I would tend to record that they have happened and only note any specific findings in some form of diary note. The weekly ones would be more formalised in their recording.
The evidence of undertaking daily checks can sometimes be a useful second line of evidence in the event of enforcement discussions.
Bob
|
|
|
|
Rank: Guest
|
Posted By Stuff4blokes
Matt, it is "best practice" to record daily checks. No legal requirement in most cases, just high level safety management.
|
|
|
|
Rank: Guest
|
Posted By Graham Halliday
Depends on your risk assessment I guess. If you are using equipment on a daily basis, with multiple users of the same equipment, it would probably justify a dail check more than a piece equipment that is only used sporadically. The Good to Go Safety system is flexible enough to allow you to do either or. You can find more details on the available applications at www.goodtogosafety.co.uk
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.