Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
LeonMcManus  
#1 Posted : 06 May 2010 00:50:49(UTC)
Rank: New forum user
LeonMcManus

Can anyone tell me on the legality of putting a cover over an emergency stop button on machinery? The cover stops accidental activation of the stop button but requires the person to lift a cover before they can hit the button. I am not sure as to the legality of the cover although I am sure that it would be better repositioning the control etc than placing an obstruction between the user and the button. Many thanks.
Invictus  
#2 Posted : 06 May 2010 07:16:22(UTC)
Rank: Super forum user
Invictus

254 Emergency stop controls should be easily reached and actuated. Common types are mushroom-headed buttons, bars, levers, kick-plates, or pressure-sensitive cables. Guidance on specific features of emergency stops is given in national, European and international standards. The above is taken from the approved code of practice for PUWER regulation 16. The first line says it all by covering will it be easy to use. It also depends on the risk assessment. I don't know if you are a H&S professional or an employee asking the question. I would advise that you get hold of a copy of the Provision and Use of Work Equipment Regulations (PUWER) and look at regulation 16.
MaxPayne  
#3 Posted : 06 May 2010 07:38:15(UTC)
Rank: Super forum user
MaxPayne

Totally agree with Farrell, that you need to read and comply with PUWER; however I might suggest that if the stop button you are having a problem with is being activated accidently during use, that it's probably in the wrong place. Just a personal opinion, but we find the kick type emergency stops to be the best for us in a woodworking environment as they mean the workpiece can still be controlled whilst the machine is brought to a safe stop. The machine supplier or the company that services or maintains the equipment should also be able to give you advice.
ptaylor14  
#4 Posted : 06 May 2010 08:53:56(UTC)
Rank: Forum user
ptaylor14

the mushroom type stop button ie protruding from the machine, are PUWER compliant. If you cover or impede the stop button for any reason it breaches puwer. Not sure I understand that the machine gets switched off accidentally.
firesafety101  
#5 Posted : 06 May 2010 16:18:20(UTC)
Rank: Super forum user
firesafety101

If my arm was trapped in a machine I don't think I'd want to lift a cover before pushing the button with my free arm :-(
LeonMcManus  
#6 Posted : 07 May 2010 08:02:15(UTC)
Rank: New forum user
LeonMcManus

Many thanks to everyone who took the time to reply, I did advise the Rig maintenance supervisor that it would be advisable to remove the cover and reposition the control. I used to be a safety officer in the transport industry but I am now working as a operator for an oil service company hoping to get into the safety side in the oil business.
Sqn Ldr Smiff  
#7 Posted : 07 May 2010 08:59:22(UTC)
Rank: Forum user
Sqn Ldr Smiff

This appears to be a human factors as well as a PUWER issue. As others have said its mostly down to risk assessment/task analysis. It can be perfectly acceptable to have covers over emergency stops, to prevent inadvertent operation. Its quite common in aircraft to have covers over the switches that operate emergency switches. Another way is to have a cover over a switch/button which is held in place by a short length of thin but easily breakable 'tell tale' copper wire. If you think of a normal 'break glass' fire alarm button in a building, this is essentially the same idea. If you re-position the emergency button you will need to think about the human factors side of the topic - can all operators easily reach the E stop?, is it in a logical position? will there be a tendency for operators to try and reach the 'old' switch before realising their error and hiting the button in its new position.
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.