Rank: Forum user
|
I understood that roadway/footpath signage for workplace traffic (people and vehicles) was to adhere, where possible, to the Highway Code. I have looked at HSG136 where this is set out. A contractor has specified something different. I'm after thoughts on this.
|
|
|
|
Rank: Super forum user
|
Garry
I suspect the contractor was referring to the New Roads and Streets Works Act, which is the 'bible' for contractors working on or about the public highway.
|
|
|
|
Rank: Super forum user
|
chapeer 8 is probably what they are quoting but many if not most 'chapter 8ers' do not realise that C8 is subserviant to MHSW and requires a MHSW risk assessment whereby all factors are considered inclusive of the Highway code. Unfortunately these areas are regularly missed out
|
|
|
|
Rank: Forum user
|
Garry what you say is quite correct, indeed it is a legal requirement under The H&S (Safety Signs and Signals) Regs 1996, reg 4(6)....pasted below:
"(6) Where it is appropriate to provide safety signs in accordance with paragraph (1) because at a place of work there is a risk to the health or safety of any employee in connection with the presence or movement of traffic (including pedestrians in relation to such traffic) and there is an appropriate sign in that connection prescribed under the Road Traffic Regulation Act 1984, that sign shall be used whether or not that Act applies to that place of work."
Having said that I think it would have to be a very petty enforcer to get too wound up if you were using an alternative sign that was patently fit for purpose.
The RTRA 1984 doesn't actually prescribe the signs, that is done by subordinate regs The Traffic Signs Regulations and General Directions 2002 [warning a fairly large download!]
Hope this helps
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.