Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error
Using MEWP in an EX area
Options
Go to last post Go to first unread
Previous Topic Next Topic
Torres  
#1 Posted : 29 March 2011 14:40:38(UTC)
Rank: Forum user
Torres
Hi Guys, Was wondering if anybody out there had experiemce of using an mewp in an EX area, I am looking at getting a 20 metre high tank painted, the material inside is highly flammable and the tank is bunded. Can a diesel operated mewp be used here?? Dont want electric as it would need charging every night. It would be hard to get a crane and basket as the tank is surrounded on three sides by water and i would need a crane with massive reach for this, this would drive the costs of painting crazy. Any ideas please. Thanks, T
Back to top
Neil P  
#2 Posted : 29 March 2011 15:13:53(UTC)
Rank: Forum user
Neil P
Hi, I take it you will be working in a zone 2 area? IMO - chalwyn valves and spark arrsetors should be fitted to plant. Work should be done under a hot work permit issued following an initial gas test and on the grounds that continuous gas monitoring takes place. Neil.
Back to top
Irish member  
#3 Posted : 29 March 2011 16:57:50(UTC)
Rank: Forum user
Irish member
We would work under HWP, with constant monitor. The access and egress would also be a consideration. Doubt a crane and basket would be approved- predictive maintenance and all that, hardly an unforeseen task. What about scaffold- again Hot work for erection. Is painting by hand/roller or spraying?
Back to top
Torres  
#4 Posted : 04 April 2011 15:05:47(UTC)
Rank: Forum user
Torres
Thanks for feedback guys, we have decided to go down the route of constant monitoring with a guy in and around the bund acting as a standby man. And all HWP
Back to top
Kate  
#5 Posted : 05 April 2011 08:50:36(UTC)
Rank: Super forum user
Kate
Why would erecting a scaffold be considered hot work?
Back to top
firesafety101  
#6 Posted : 05 April 2011 10:04:46(UTC)
Rank: Super forum user
firesafety101
Kate wrote:
Why would erecting a scaffold be considered hot work?
Possibly in summer? (I know it's not Friday yet)?
Back to top
Kate  
#7 Posted : 05 April 2011 10:10:33(UTC)
Rank: Super forum user
Kate
Particularly if you make them wear overalls I suppose!
Back to top
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET