Rank: Forum user 
|
CAT and Gennys are used to detect conductors, but could they be used to detect a water pipe, the person has a clamp to inject a signal from the genny into the pipe, any suggestions?
|
|
|
|
|
|
Rank: Super forum user 
|
Not if the water pipe is non-conducting.
If it's a conducting pipe then you might get it by re-radiating radio signals without the genny. If that doesn't work then the genny can impose a signal, but if it's a plastic pipe it won't help.
You could put a mouse down the pipe and trace that, but in practice it's rare to actually have access to do that.
|
|
|
|
|
|
Rank: Super forum user 
|
Seamus, not an expert on C&Ts but I believe water pipes can be detected by CAT scans in radiodetection mode, even if the pipes are not constructed of a conducting material ie metal, otherwise a genny can be used if it is a metal pipe but unfortunately many water pipes are plastic. See guidance: http://www.surreyhire.co.uk/docs/manual/O20001.pdf
|
|
|
|
|
|
Rank: Super forum user
|
Take a look here for a wealth of info. http://www.radiodetectio...nt_links.asp?sec_id=2726You may need to copy and paste the whole link. The ABC + XYZ of locating buried pipes and cables is an excellent guide imo. IIRC, most modern water pipes (the blue stuff) have a metal tape running their length to aid with tracing.
|
|
|
|
|
|
Rank: Forum user
|
Thanks for the replies, it is a plastic pipe (old one), it has drinking water going through it, so i was wondering if the water would conduct the signal to help tracing, , it is not possible to put a sonde into it. i guess it wont work. It is there with ages,No tracer wire was run with it.
|
|
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.