Rank: New forum user
|
Hello,
I am looking for some advise on Radon gas being reportable incident if its above certain levels. I have looked for various websites and other referances. The only guidence I can find is that if the level is above 400 bq/m3 then you must take immdiate action.I can not see anything that states they you must make a report to the HSE.
Please could someone advise on what the case maybe?
Many thanks
Gavin
|
|
|
|
Rank: Forum user
|
It's not a RIDDOR reportable. Depending on the work activity (are you a tin miner for example?) you may attract the Ionising Radiations Regs (see HSE web site for details.) so notification might just apply although take advice first from a qualified RPA.
It's a serious lung cancer problem (alpha decay in the lungs - nasty) and there's a lot of good info on the HPA web site at http://www.hpa.org.uk/To...ngRadiationTopics/Radon/
|
|
|
|
Rank: Forum user
|
Sort of related to this, I've had a home in the North Pennines for years now and when I bought it the survey recommended we establish levels of radon present as the house is in an area of former lead mining. It came back with incredibly low levels of radon but I was recommended to reduce it further by installing underfloor venting.
I'm unclear how that will dilute the levels?
|
|
|
|
Rank: Forum user
|
Gavin
Have been carrying radon tests as several premises in my organisation, we had 2 premises where the readings exceeded the legal exposure limits of 400bq and the letter from the HPA stated we had to notify the local enforcing authority for H&S this we did. We took remedial action and had sump pumps and ventilation installed the readings following this work were also sent to the enforcing authority to show the reduction in levels.
2 enforcing authorities were involved as they were at opposite ends of the country.
Martin
|
|
|
|
Rank: Forum user
|
martin .
In Cumbria , we used to be made to build radon barriers into the cavity wall below DPC . this was made by a combination 500 grade visqeen and 450mm DPC. I remember with 3 mile radius of any landfill ?
The problem always was it was very unreliable in the corners obviously resulting in possible leaks I am just wondering if you have the details of the plans and said radon barriers ?
I doubt if ever they did the intended purpose that's in my view .
joe
|
|
|
|
Rank: Forum user
|
I do not wish to be alarmist but...
Just because you are not in an area that is not on the Radon map do not assume that you do not have radon problem.
If you are in a building that is predominantly of concrete construction and have basement rooms that are not well ventilated you could have a radon problem due to the aggregates present in the concrete.
|
|
|
|
Rank: Forum user
|
And try this
http://www.hse.gov.uk/radiation/ionising/radon.htm
and look at the part titled "Below ground workplaces"
"For occupied below ground workplaces (for example occupied greater than an average of an hour per week/ 52 hours per year), or those containing an open water source, the risk assessment should include radon measurements. This applies to all below ground workplaces in the UK, irrespective of the above ground Affected Areas status."
This means that every employer, regardless of whether or not they are in an affected area, has to carry out a Radon survey of all their below ground workplaces where people are at work for more than 1 hour per week. There are a lot of workplaces to be surveyed and very few employers even know about the requirement.
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.