IOSH forums home
»
Our public forums
»
OSH discussion forum
»
Saw dust as spill kit in fabrication work shop
Rank: New forum user
|
We are using saw dust as a spill kit in a fabrication work shop. There are lots of welding bays and so open flames. The saw dust is stored in sealed containers. Would you class this as an 'ok' practice or would you suggest an actual commercial spill kit.
|
|
|
|
Rank: Super forum user
|
Really?... 67 view and no reply..
It isn't a good idea...all things being equal you may have some great procedures and positive staff who stick to them 120% of the time...there will always be that one time...which is one time too many...proper spill kits don't cost much but before you invest in that if there are so many spills you need this try tackling the route cause first and prevent the spills then put a new kit in place...it should last longer!!
|
|
|
|
Rank: Forum user
|
Not a good idea in my opinion.
Think of the fire triangle-
Ignition source - yes
Fuel - yes
Oxygen - yes
Replace with proper spill kits.
As SteveDM said though - eliminate spills?
|
|
|
|
Rank: Super forum user
|
I tried burning some saw dust once in my house coal fire - it put it out!. However I would agree, the odd smoldering bit here and there may not be noticed and could catch out of hours.
Spill of what - oil or paint or ....
We used to use sand for paint
Chris
|
|
|
|
Rank: Super forum user
|
|
|
|
|
Rank: Super forum user
|
No for me I am afraid.
Material used to absorb spills should be inert - and not likely react to anything it is designed to absorb - 'kitty litter' type materials or the mats/pads/booms etc - and dont forget to dispose of the contaminated materials in an appropriate manner.
Stu
|
|
|
|
IOSH forums home
»
Our public forums
»
OSH discussion forum
»
Saw dust as spill kit in fabrication work shop
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.