Rank: Forum user
|
I had a conversation with a friend who is a welder. I noticed when i met him at his work (work on same industrial site), that his hi viz vest had several burn marks. I asked him if he felt it was an added risk wearing the hi viz when welding, due to the burn marks, but he replied they had to wear them at all times. Would i be right in thinking only the correct welding boiler suit should be worn, and not an additional hi viz?
|
|
|
|
Rank: Super forum user
|
No proper risk assessments (especially PPE risk assessments) in place hence the risk of wearing hi vis vests have not been picked up ------ this goes for many instances where hi vis vests can cause problems -------there is alternative hi visibility kit available that does not snagg but it costs £ hence it is not supplied
only today I noted a hi vis vest snagging a load causing the carrier to struggle more than they should do - they said that it happens all the time but management will not change their blanket rules
welding boiler suit: such things are only good in very very limited circumstances
|
|
|
|
Rank: Super forum user
|
I have a friend who HAD to wear a hi-viz and it caught fire when he was welding!
I thought PPE had to be fit for purpose, so bob, surely this employer is not meeting their obligations?
IF I have to go on site where Hi-Viz is required and I am around hot work (in close proximity) I have a Hi-Viz "flame proof" boiler suit, sorted!
IMHO, a welder should be wearing a "flame retardant" boiler suit when they are undertaking hot works as should anyone doing hot metal works.
|
|
|
|
Rank: Super forum user
|
¨welding boiler suit: such things are only good in very very limited circumstances¨
That´s a strange comment. Proban, or similar, ¨overgarments¨ are pretty standard in the industry. Even ¨all dis elf-n-safety stuff does me ´ed in¨ firms tend to buy/rent them. I would certainly wear them, as would just about all welders. Trying to get burning overgarments/coveralls/boiler-suits off is hot work! In fact, I even buy my own (agency work). At 25 quid a pair (hi-viz) they are not an expense, they are an investment!
|
|
|
|
Rank: Forum user
|
I work for a welding/fabrication company who carry out a lot of works in areas which require the wearing of hi-vis vests etc when working on customers sites. Our policy is that our welders wear orange proban, or similar standard, boilersuits to EN ISO 11611 which do not contain any reflective tape. When they are not physically carrying out hot works operations, or operating near them, they are permitted to remove the hi-vis garment. Part of our set up process of the working area is to set up physical barriers to prevent unauthorised access of persons and/or vehicles so whilst working within the confines of this area there is no real reason to have to wear hi-vis garments.
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.