Rank: New forum user
|
Dear All,
Just a bit of assistance needed please as I can not find the answer?
I have been asked, if we use 3 phase in the workplace and in racked units, should we put warning signage up for this?
I have not come across this before other than warning signage for possible electric shock.
Any assistance is more than welcome.
Many thanks,
Dave
|
|
|
|
Rank: Forum user
|
Its quite normal for workplaces to have three phase power, especially where machinery and equipment is required to be powered.
If you look at your meter it will have a reading for each phase.
No need for warning signs
|
|
|
|
Rank: Super forum user
|
chelseadavey1969 wrote:Dear All,
Just a bit of assistance needed please as I can not find the answer?
I have been asked, if we use 3 phase in the workplace and in racked units, should we put warning signage up for this?
I have not come across this before other than warning signage for possible electric shock.
Any assistance is more than welcome.
Many thanks,
Dave
No requirement for any signage over and above that you would have for single phase, as line to earth voltage is the same whether it's single or three phase.
An awful lot of commercial and, most industrial properties have 3 phase supplies.
Take any large hotel, they will have a 3 phase supply.
No additional warning notices.
Anyone working on the electrical system would not require a warning label to tell them that the supply is 3ph, and if they do, throw them off site never to return because they are not competent to be working there! ;)
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.