Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
WeSam  
#1 Posted : 24 June 2019 10:49:40(UTC)
Rank: New forum user
WeSam

Hi All,

Can someone guide me on Explosive atmoshpere requirements for paint both (for Heavy equipment spray painting). Booth building design requirments and zone class. Very urgent please.

Ian Bell2  
#2 Posted : 24 June 2019 12:18:20(UTC)
Rank: Super forum user
Ian Bell2

Zone 0

External lighting and heating.

Forced air extraction.

Blow out panels usually in the roof.

Cat 1 electrical equipment if you must have electrical equipment in the booth.

Anti-static clothing/footwear  and conductive flooring.

Anti-static hoses/spray lines. Electrical bonding of equipment

thanks 2 users thanked Ian Bell2 for this useful post.
CptBeaky on 24/06/2019(UTC), Par.Dhonsi on 24/06/2019(UTC)
Roundtuit  
#3 Posted : 24 June 2019 17:19:25(UTC)
Rank: Super forum user
Roundtuit

Originally Posted by: WeSam Go to Quoted Post

Hi All,

Can someone guide me on Explosive atmoshpere requirements for paint both (for Heavy equipment spray painting). Booth building design requirments and zone class. Very urgent please.

Get someone competent
Roundtuit  
#4 Posted : 24 June 2019 17:19:25(UTC)
Rank: Super forum user
Roundtuit

Originally Posted by: WeSam Go to Quoted Post

Hi All,

Can someone guide me on Explosive atmoshpere requirements for paint both (for Heavy equipment spray painting). Booth building design requirments and zone class. Very urgent please.

Get someone competent
Ian Bell2  
#5 Posted : 24 June 2019 19:11:46(UTC)
Rank: Super forum user
Ian Bell2

Did someone mention DSEAR assessments?

stevedm  
#6 Posted : 25 June 2019 06:46:52(UTC)
Rank: Super forum user
stevedm

It does actually depend on the products used generally Ian is right but there are a few more calculations to complete the assessment.  A completent supplier will give you good advice on the equipment etc, however that will be dependant on your DSEAR/ATEX risk assessment. 

Don't forget that there are also Industrial Hygiene issues or Occupational Health issues that need to also be in place...

The two publication below should help you..

http://www.hse.gov.uk/pUbns/priced/hsg276.pdf

http://www.hse.gov.uk/pUbns/priced/hsg140.pdf

John Elder  
#7 Posted : 01 July 2019 15:04:47(UTC)
Rank: Forum user
John Elder

The following Standard lays out the Safety Requirements, Design and Hazardous Area Classifications for all types of Spray Booth.

BSEN 16985:2018 Spray booths for organic coating material Safety requirements.

This covers both wet and powder coating operations

John Elder  
#8 Posted : 02 August 2019 12:30:16(UTC)
Rank: Forum user
John Elder

You need to refer to BSEN 16985:85 Spray booths for organic coating material- Safety requirements. This is the standard the booth should be manufactured to and the Hazardous Area Classification has been completed for you for spray booths manufactured to this standard within the document.

It will not be a zone 0 as previously mentioned as you are not allowed to work inside a zone 0. It will be a Zone 1 Hazardous area.

If it is an open booth or has doors it also shows you how far the Hazardous Zone extends outside these areas.

Users browsing this topic
Guest (2)
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.