Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
aga_greaves  
#1 Posted : 10 July 2019 09:43:53(UTC)
Rank: New forum user
aga_greaves

Hi, I have on site 1 maintenance technician who ocassionally does spot welding. He would mostly do stick welding, rarely MIG welding. I am in the workshop a lot so I know that this "spot" or "tack" welding takes him no more than 5-10 minutes at the most each time. He probably welds something once per month and it would be a fallen small metal plate / pipe stopper from the pipe rack, or something similar. If we have more welding requirements, we simply bring a specialist contractor on site. Our workshop is a massive open space with few machines and pipe racks; workshop has got some roof extractors and 3 full size roller doors. Some welding is also done outside.

In these circumstances, how should I interpret the latest HSE advice on welding: does he need to have extraction and RPE or is RPE enough for short term welding that he does?

Edited by user 10 July 2019 09:45:41(UTC)  | Reason: some typos found

SJP  
#2 Posted : 10 July 2019 10:36:52(UTC)
Rank: Forum user
SJP

Hi,

Go to this page http://www.hse.gov.uk/welding/fume-extraction-rpe.htm and look about 3/4 down and there is a section that indicates RPE would be sufficient.

Hope this helps.

CptBeaky  
#3 Posted : 10 July 2019 10:38:16(UTC)
Rank: Super forum user
CptBeaky

The 'new' guidelines are much more specific now. You will be expected to have engineering controls (i.e LEV). There is currently no safe exposure limit for mild steel welding, and as such you need to bring it to as low as is practicably possible.

I know this makes it very hard, we are struggling with this too. However it is hard to argue against protecting your workers from a known carcinogen. Given the hierachy of control always had engineer controls at the top I suppose we should have seen this coming.

CptBeaky  
#4 Posted : 10 July 2019 10:41:47(UTC)
Rank: Super forum user
CptBeaky

Originally Posted by: SJP Go to Quoted Post

Hi,

Go to this page http://www.hse.gov.uk/welding/fume-extraction-rpe.htm and look about 3/4 down and there is a section that indicates RPE would be sufficient.

Hope this helps.

That page has the following warning on

"New evidence shows exposure to mild steel welding fume can cause cancer. Employers should use suitable controls for all welding work. The current guidance on mild steel welding is out of date and will be updated as soon as possible to take account of this new evidence."

As such you should look at http://www.hse.gov.uk/safetybulletins/mild-steel-welding-fume.htm#utm_source=hse.gov.uk&utm_medium=refferal&utm_campaign=welding-alert&utm_content=cross-site-banner as well

Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.