Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
kwoodhouse  
#1 Posted : 23 February 2021 11:04:35(UTC)
Rank: New forum user
kwoodhouse

We have a requirement for an operator to load a roll of label material onto a machine where the mandrel is above shoulder height. Some of the operators are small and both male/female and the rolls can weigh up to 20kg. If we get a platform with 2 treads, is it acceptable to ask the operators to carry the roll up the 2 steps to bring them to the correct height for placing it on the machine?

peter gotch  
#2 Posted : 23 February 2021 11:16:07(UTC)
Rank: Super forum user
peter gotch

KW - no easy answer to your Q.

The risk is going to depend on numerous variables, including:

How often this task is performed.

Dimensions of the roll.

Dimensions of the mandrel and its position as the roll is put on (and the empty taken off).

Space around the operation - including e.g. any obstructions, which depending on the size of the steps might include one or two handrails.

Environmental conditions.

What the person is wearing.

However, the first Q is probably why you can't using some mechanical aid to lift the roll up to the height of the mandrel or drop the mandrel down?

thanks 3 users thanked peter gotch for this useful post.
CptBeaky on 23/02/2021(UTC), kwoodhouse on 23/02/2021(UTC), chris42 on 23/02/2021(UTC)
kwoodhouse  
#3 Posted : 23 February 2021 11:27:32(UTC)
Rank: New forum user
kwoodhouse

Thanks for your reply Peter.

We do have a mechanical lifting aid available which is quite cumbersome and time consuming to use. There is also a need to have a platform so that the operator can see to work on the roll once it is in place on the machine, so this would make access for the lifter difficult.

The steps we've looked at have handrails, but obviously the operator would be holding the roll in both hands and unable to hold the handrail.

Roundtuit  
#4 Posted : 23 February 2021 12:06:53(UTC)
Rank: Super forum user
Roundtuit

I love the seemingly universal presumption people should be able to carry 25Kg based upon that diagram from indg 143 (which BTW shows 10kg for men and 7kg for women at close shoulder height).

You need a form of handling device - no single operator should be trying to raise 20kg over their shoulder.

Better still adjust the machine so that the unwind is at ground level or can be loaded from ground level.

thanks 6 users thanked Roundtuit for this useful post.
chris42 on 23/02/2021(UTC), kwoodhouse on 23/02/2021(UTC), Ajolie19 on 23/02/2021(UTC), chris42 on 23/02/2021(UTC), kwoodhouse on 23/02/2021(UTC), Ajolie19 on 23/02/2021(UTC)
Roundtuit  
#5 Posted : 23 February 2021 12:06:53(UTC)
Rank: Super forum user
Roundtuit

I love the seemingly universal presumption people should be able to carry 25Kg based upon that diagram from indg 143 (which BTW shows 10kg for men and 7kg for women at close shoulder height).

You need a form of handling device - no single operator should be trying to raise 20kg over their shoulder.

Better still adjust the machine so that the unwind is at ground level or can be loaded from ground level.

thanks 6 users thanked Roundtuit for this useful post.
chris42 on 23/02/2021(UTC), kwoodhouse on 23/02/2021(UTC), Ajolie19 on 23/02/2021(UTC), chris42 on 23/02/2021(UTC), kwoodhouse on 23/02/2021(UTC), Ajolie19 on 23/02/2021(UTC)
Users browsing this topic
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.