Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Philip Neal  
#1 Posted : 16 November 2021 16:24:11(UTC)
Rank: Forum user
Philip Neal

We have had an issue, whereby a Warehouse Staff member has tried to tamper with a forklift truck which someone is using, in order to cause the forklift truck to skid, not to mention this could have caused a much more serious accident. This was all captured on CCTV.

As you can imagine this is extremely reckless and dangerous, and the warehosue staff member will be receiving displinary action.

Can anyone advise if there is any Health and Safety Law/legislation in which this employee has broken?

We want to inform him of this law when the displinary meeting is taking place, in order to educate him and make him aware. We have a risk assessments but we did not consider people being silly and reckless and its hard to mitigate and control this. 

Edited by user 16 November 2021 16:25:35(UTC)  | Reason: Not specified

Roundtuit  
#2 Posted : 16 November 2021 16:44:05(UTC)
Rank: Super forum user
Roundtuit

HASAW Section 7 employees duty https://www.legislation.gov.uk/ukpga/1974/37/section/7

Personally it would be instant "gross miss-conduct" dismissal along with contemplation of handing the evidence to the constabulary for potential criminal charges especially if the conduct was out of malice for the FLT driver.

Roundtuit  
#3 Posted : 16 November 2021 16:44:05(UTC)
Rank: Super forum user
Roundtuit

HASAW Section 7 employees duty https://www.legislation.gov.uk/ukpga/1974/37/section/7

Personally it would be instant "gross miss-conduct" dismissal along with contemplation of handing the evidence to the constabulary for potential criminal charges especially if the conduct was out of malice for the FLT driver.

RTrueman  
#4 Posted : 16 November 2021 16:47:35(UTC)
Rank: New forum user
RTrueman

You can also state Section 8 of the Health & Safety at Work Act:

Section 8 of the Health and Safety at Work, etc Act 1974 is intended to prevent the interference with or misuse of articles or equipment provided. It states that no person shall intentionally or recklessly interfere with or misuse anything provided in the interests of health, safety or welfare.

stevedm  
#5 Posted : 16 November 2021 20:27:00(UTC)
Rank: Super forum user
stevedm

corporate homocide - attempted wreckless endangerment...either way gross misconduct - so long as you have the right eveidence

stevedm  
#6 Posted : 16 November 2021 20:44:39(UTC)
Rank: Super forum user
stevedm

what I meant to say was ...be very careful...employers are vicariously liable for the deeds of thier employees...just make sure you have all of your ducks in a row...as you could see a claim for unfair..and I would go down breach of company rules/ gross misconduct rather than legislation, although it is implied...use the employement contract to summary dismiss...you may find all that you can do is give the person a final written warning...

stevedm  
#7 Posted : 17 November 2021 08:48:46(UTC)
Rank: Super forum user
stevedm

having read your post once more ...this time without wine...it really does depend on how strong you want to go here...on the surface part of gross misconduct and criminal damge (Criminal Damage Act 1971, s.1(2) and (3))..you need to establish intent....in future I would D&A test on report...there could be an underlying mental health, personal or cultural reason the attempt was made which could be more serious...which is why you keep the investigation objective and factual always...and if it points to something more serious then either help should be sought for the individual or the matter handed over to the relevant authorities... 

A Kurdziel  
#8 Posted : 17 November 2021 09:26:36(UTC)
Rank: Super forum user
A Kurdziel

If its as bad as you say, then you sack them and cite gross misconduct. If they whinge, mention all of the  legislation above and remind them that they could be facing criminal charges and the company might sue  for  damage to the FLT: it need to be repaired and made safe again which is a cost against the company. Make it clear in their references why they were dismissed. That will demonstrate  to everybody that that company has zero tolerance of such behaviour.  

fornhelper  
#9 Posted : 23 November 2021 15:40:27(UTC)
Rank: Forum user
fornhelper

Obviously a serious breach of H & S law and certainly it could / should be a 'sackable' offence however, unless he has a track record of such behaviour, I would favour the 'educate and awareness' route you mention.

Maybe asking him to work with you safety dept and develop and present a 'powerpoint' to his colleagues on forklift safety would certainly educate him and get a clear message across to others??

A Kurdziel  
#10 Posted : 24 November 2021 09:22:48(UTC)
Rank: Super forum user
A Kurdziel

How many people need to be injured before it becomes a ‘track record’ of inappropriate behaviour?

Accidentia  
#11 Posted : 01 December 2021 16:42:02(UTC)
Rank: Forum user
Accidentia

Originally Posted by: A Kurdziel Go to Quoted Post
How many people need to be injured before it becomes a ‘track record’ of inappropriate behaviour?
Precisely. Consider the position the company will be in if this employee is kept on, given a second chance and does something equally stupid in six months time. Any injured party and the relevent enforcing authority will be able to demonstrate a 'track record' of inappropriate inaction with all its consequences.
Juan Carlos Arias  
#12 Posted : 03 December 2021 11:58:54(UTC)
Rank: Forum user
Juan Carlos Arias

I would ensure an investigation into the incident is conducted followed by a disciplinary hearing. Gross miscunduct and dismissal is clearly on the cards here and I would say it will all depend on the investigation and the attitude of the person. A few years ago I had somehing similar and despite having in our head that we wanted to go down the education route, during the disciplinary hearing it was evident that there was no remorse and even words to say that the person would do the same if presented with the same circumstances in the future. At that point it was clear that the most sensible and safe thing to do was to part companies with them.  

thanks 1 user thanked Juan Carlos Arias for this useful post.
A Kurdziel on 03/12/2021(UTC)
chris42  
#13 Posted : 03 December 2021 16:32:19(UTC)
Rank: Super forum user
chris42

I think as well, you need to set a standard for behaviour to the remaining employees. Its not ok to do something deliberately dumb even once.

Users browsing this topic
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.