Rank: New forum user
|
Hi...can you help. In the last few weeks I have been asked the same question by contractors installing electrical cables and A/C units above ceilings. Due to the limited space to access the area above the ceiling shorter operatives can not reach the required area as the MEWP can not be rasied high enough due to the ceiling line.
They have asked what they should do as a ladder isn't appropriate for the work they need to carry out and instead they have decided to access the area by standing on the midrail of the MEWP.
Has anyone come across this problem before and what control measures did you put in place?
|
|
|
|
Rank: Forum user
|
I assume a suspended ceiling, can the sectional framwork not be removed to allow the MEWP to reach higher?
|
|
|
|
Rank: Super forum user
|
Might a different style of MEWP give better reach, eg cherrypicker vs scissor lift? (I don't have a very clear mental image of the situation, so this might not be relevant at all.)
|
|
|
|
Rank: Forum user
|
have a look at single person ones, they have a basket just a bit bigger than the footprint of the person standing in it, perhaps will mean that you can get in and hire a one from one of the hire companies for the time thay you need it, think they also go through doorways etc so can get where you want so no issues with access.
http://www.nationwideplatforms.co.uk/hire/low-level-access
|
|
|
|
Rank: Super forum user
|
I can see two options here either remove the ceiling section so that the MEWP can go higher or get the single person MEWPs that have a smaller footprint (about 1m x 1m)
|
|
|
|
Rank: Forum user
|
|
|
|
|
Rank: Forum user
|
Standing on the midrail of the MEWP defeats the whole purpose of having a MEWP in the first place and goes against any training etc.
Marry the equipment selection to the job.
Currently with our suspended ceilings we utilise mobile towers to provide a safe work platform for similar activities. However, this might not be suitable in your situation.
Risk assessing the activity with your contractors should ensure you come up with a suitable solution which you can then discuss with an appropriate equiment supplier.
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.