Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
magee14  
#1 Posted : 23 April 2018 12:15:38(UTC)
Rank: New forum user
magee14

Hi all,

I was looking for some advice / guidance on storage of sheet materials on a construction site - typically plasterboard / ply / panels etc. Obviously this requires to be secured to prevent toppling over. I am looking to issue a generic solution to all of our sites and was wondering if anyone has seen a simple practical solution.

In the past I have seen frames built from 4x2, metal strap screwed into the wall at both sides of the plasterboard to contain, metal track screwed from above the plasterboard and bent over the top of the boards, etc.

Also, does the above require a temporary works input in terms of fixing detail / max. number of boards allowed, etc.

Any and all help appreciated!

thanks 1 user thanked magee14 for this useful post.
Kim Hedges on 30/04/2018(UTC)
Woolf13  
#2 Posted : 25 April 2018 11:53:51(UTC)
Rank: Forum user
Woolf13

Hi,

Whilst not construction and ply the following two HSG documents can be used for good practice ideas and give you a steer in terms of what is an acceptable standard in terms of layout, loadings, securing, etc.

http://www.hse.gov.uk/pubns/books/hsg246.htm

The warehouse storage HSG can be accessed from the link above.

I hope this helps?

thanks 1 user thanked Woolf13 for this useful post.
Kim Hedges on 30/04/2018(UTC)
SW  
#3 Posted : 27 April 2018 17:02:38(UTC)
Rank: Super forum user
SW

Hi

Have a look at Glass equipment suppliers. Glass stillages may be of interest to you.

Regards

SW

Arfur2  
#4 Posted : 30 April 2018 13:00:26(UTC)
Rank: New forum user
Arfur2

Hello

The stacking of sheet materials vertically is now an unaccepatble practice on our sites

There are also many unstable board trolleys and we insist on ones which are anti topple and display SWL. 10 boards weight 25Kg each is a lot of weight to fall onto someone

One of the best product range for distribution and handling of sheet products is the Starke Arvid range - definatley workl a look http://starkearvid.co.uk/

thanks 1 user thanked Arfur2 for this useful post.
Kim Hedges on 30/04/2018(UTC)
Kim Hedges  
#5 Posted : 30 April 2018 14:29:31(UTC)
Rank: Super forum user
Kim Hedges

Good link that, thanks. 

On a personal note, having worked in the past for building product companies including Travis Perkins, who have adopted far safer practices for the storage of Plasterboard and other products.

Plasterboard is delivered to a building site flat on pallets, many distribution companies use cheap low quality pallets which often collapse when they get onto a building site.  So you as a consumer may be able to stipulate in your order to only supply pallets of a certain quality, thus improving safety, plus if you then look after the pallets and return them to the distributor you reduce waste handling and increase your environmental credentials (ISO45001).  So your original idea was to stack this product vertically, that means some workers will end up having to slide sheets off the pack and stack them.  A back breaking and slow task that impacts directly on any manual handling.  Increased sickness from sore backs is a likely outcome.  This is a bad idea in general.  Plasterboard is fragile and the edges chip very easily - your plasterers will curse you frequently.  

Plasterboard also loves moisture, so keeping large quantities on site is a bad policy, as the boards suck in moisture, even when double wrapped in plastic.  'Just in time' is a better strategy, but you'll have to either hire a dedicated transport for this or work with a supplier on a specific contract to enable this.  It is do-able, i've seen it, it does work. 

Do not stack vertically, it is unsafe. 

Depending on your building site, most have access to telehandlers and cranes, having a loading dock to handle plasterboard would probably be your best long term sollution, but you have to plan for it in advance or at least make a provision for this work and may need temporary works to safely put it in place.  A pack of plasterboard is heavy, check the total weight before it comes to site and place the weight on the outer packaging in bold (spray painted works best) for the mechanical handlers and slingers. 

Last point, have a raised, hard standing area for the delivery truck to wait by and for the initial download of the product from the truck.  Sounds basic, but so many companies forget this and simply try to put pallets on earth, rather than building a simple grid of either wood or steel to keep the product off the ground and away from moisture.  This is also true for Steel Rebar, Bricks and Blocks, pre-formed contrete and timber.  An added benefit to this also allows for slingers to safely attach slings and chains to these loads at their center points. 

Have a safe day. 

Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.