Heath Robinson springs to mind especially if this is:

1) Outside

2) Used for large/bulky/heavy components

3) Being used as a permamnet solution

Hi,

I have a bit of experience within storage and racking systems and have seen and been part of investigations when things have gone wrong. I personally would say that scaffold is not suitable as it is not designed and made to be used as a storage system. Storage and racking systems are quite quite tightly controlled and purpose built for whatever is going to be stored in them. I just think that should anything happen it could be difficult to explain how scaffold was used as fit for purpose when there are systems and equipment out there. A lot of information can be found at the SEMA website http://www.sema.org.uk/

I agree with NBBeacock. Racking is very tightly controlled and should be inspected (at least annually) by a competent person (generally SEMA qualifed). Regular "in house" inspections (monthly?) should also be considered. SEMA offer a one-day course for this.

Arrangements should be in place for any racking on site i.e. repair work, copies of inspection reports, evidence of installation and commissioning etc etc.

Also, be aware that racking installation and dismanteling will fall under CDM too!

Good luck....