Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
prads  
#1 Posted : 11 June 2019 04:53:08(UTC)
Rank: Forum user
prads

Hi All,

Want some advise on the HSE impact of removal of anti-static vinyl flooring from switch gear room. What does NFPA standards require? What kind of flooring is required? What is the issue of retaining vinyl flooring?

Any advise is appreciated.

Regards,

P

 

Ian Bell2  
#2 Posted : 11 June 2019 07:39:41(UTC)
Rank: Super forum user
Ian Bell2

More info required.

Which NFPA standard - there are lots?

What industry?

UK based installation?

Why the concern with static electricity - electrical signal quality/interruptions to the main power supply causing power trips?

UK EAW Regs apply, which no doubt you know if in the UK. Many plant room/switch room floors are just concrete finished

prads  
#3 Posted : 11 June 2019 08:15:41(UTC)
Rank: Forum user
prads

Hi Ian,

Thank you for your reply. I am not sure which NFPA standard (could be 850). Just want to know an anti static flooring is required in a electrical switch gear room or normal concrete floor would suffice. Will there be any risk of personnel electrocution during maintenance or switchgear operation?

Regards,

P

Ian Bell2  
#4 Posted : 11 June 2019 08:21:13(UTC)
Rank: Super forum user
Ian Bell2

Not if the electrical switchroom gear has been designed correctly in the first place and relevant personal safety practices are followed by people who need to enter.

Refer to EAW regs.

Concrete is non conducting

prads  
#5 Posted : 11 June 2019 09:09:31(UTC)
Rank: Forum user
prads

Thank you, Ian. But, do we see static electricity as a significant hazard in switchgear/substation rooms? I am asking this coz, in our company standards specification it is mentioned that "In substation/panel room, type of Vinyl shall be anti-static surface, chemical and slip resistant complying to UL Standard NFPA life safety code 101, class 1"

Now the contractor is proposing to deviate from this standard, and proposing concrete slab with hardened finish.

If you have any suggestions, please let me know?

Regards,

P

paul.skyrme  
#6 Posted : 11 June 2019 09:24:42(UTC)
Rank: Super forum user
paul.skyrme

If this is in the UK then the NFPA standard is irrelevant to UK legislation. I personally would be unhappy working on a conductive floor in a switch room. Anti-static flooring is by its very nature conductive in order that it functions to dissipate the static charge. Why do you see static electricity a hazard in switch rooms? What is the environment? On land? Oil rig at sea? Petrochemical plant? High rise office block? Where is the build up of static charge going to be? Concrete in itself is mildly conducting. The metallic switchgear must be solidly connected to the means of earthing for the installation so that will dissipate the charge from itself inherently.
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.