Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Bibbin  
#1 Posted : 09 August 2019 12:05:46(UTC)
Rank: New forum user
Bibbin

Purely hypothetical of course!

Carrying out H&S audit of sheltered housing scheme, investigate small electrical intake cupboards there is no rubber matting in situ.  Make arrangements for rubber matting to be put down but a higher entity says that electricians should be bringing their own rubber matting so we don't need to provide.

I believe we would be liable for injury if electrician turns up 'out of hours', and doesn't bring the rubber mat with him, gets electrocuted.

I'm concerned about:

Cost of providing rubber matting is nominal so meets cost/risk viewpoint

Contractor RAMS do not state anywhere they are providing their own rubber matting

I've searched the Electricity at Work regs as well as other HSE documentation and cannot find anything written to say we have to provide the matting only if the electrical switch room meets certain dimensions which our do not.

Any advice please?

Thanks :-)

paul.skyrme  
#2 Posted : 09 August 2019 13:32:44(UTC)
Rank: Super forum user
paul.skyrme

Why are you providing matting?

Why are you forcing your contractors to work live on the equipment?

thanks 1 user thanked paul.skyrme for this useful post.
A Kurdziel on 12/08/2019(UTC)
Bibbin  
#3 Posted : 12 August 2019 09:03:26(UTC)
Rank: New forum user
Bibbin

Paul.skyrme - we are not working 'live'.   Some of the sheltered housing schemes I have visited have rubber matting in them and some don't.  

Roundtuit  
#4 Posted : 12 August 2019 09:20:19(UTC)
Rank: Super forum user
Roundtuit

So nothing to do with the whims of different people at different times resulting in presence or absence?
Roundtuit  
#5 Posted : 12 August 2019 09:20:19(UTC)
Rank: Super forum user
Roundtuit

So nothing to do with the whims of different people at different times resulting in presence or absence?
A Kurdziel  
#6 Posted : 12 August 2019 09:38:20(UTC)
Rank: Super forum user
A Kurdziel

I am not an electricity expert by any means (unlike Paul) but when I saw this  I thought surely matting is only relevant if you are thinking about live working. Live working should only be done in exceptional circumstances therefore the matting is irrelevant.  Once you have de-energised the circuit there is no risk of electrocution. Or am I missing something?

thanks 1 user thanked A Kurdziel for this useful post.
SJP on 14/08/2019(UTC)
Bibbin  
#7 Posted : 12 August 2019 14:47:26(UTC)
Rank: New forum user
Bibbin

Hi

I was confused which I posted the question.  I asked NICEIC for their guidance in this and they advised me its all about the risk assessment (not too helpful when I am not an electrician either).

Are you all advising that the need for rubber matting is only applicable in the event of 'live working'?

Thanks muchly

paul.skyrme  
#8 Posted : 12 August 2019 15:03:54(UTC)
Rank: Super forum user
paul.skyrme

Originally Posted by: Bibbin Go to Quoted Post

Hi

I was confused which I posted the question.  I asked NICEIC for their guidance in this and they advised me its all about the risk assessment (not too helpful when I am not an electrician either).

Are you all advising that the need for rubber matting is only applicable in the event of 'live working'?

Thanks muchly

Why ask the NICEIC?

However, yes it is down to risk assessment, rubber matting is not even "essential" for live working.

If you fit matting then it is down to you to ensure that it is suitable and sufficient for the requirements and is adequately maintained.

If your contractors are working live, then it is down to their live working RAMS to decide the control measures.

However, there are few reasons that they should need to work live.

biker1  
#9 Posted : 13 August 2019 11:18:03(UTC)
Rank: Super forum user
biker1

If you do decide to get rubber matting, just make sure it's not made from recycled rubber. Think about the main source of recycled rubber and what could be in it!

johnmurray  
#10 Posted : 13 August 2019 14:58:40(UTC)
Rank: Super forum user
johnmurray

Not going to make any difference if the contact route is other than via hand-feet....

Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.