Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
pardhonsi  
#1 Posted : 14 April 2021 15:08:18(UTC)
Rank: New forum user
pardhonsi

We operate as the final part of a supply chain, where our customer will send us a pallet of goods, we prepare the components, re-stack these on the same pallet they came in on, and send it back. The customer also sends us crates, so we stack the components into these crates, secure the lid back on and send them back.

The customer demanded quite rudely, with reference to Pallet Safety guidance note PM15 (fourth edition) that we must include the SWL on the packaging for them. I have noticed this has not been the case when they send the components to us. We don't do anything significantly to the compoenents that causes the weight of the load to alter, but they're just neatly rearranged, so the weight of the load will be the same coming in, as it is going out. This is not required by any other customer who send components a lot heavier.

We have also worked with this customer for years, but now suddenly we have received an abrupt email. Is it a legal requirement as such? Should they be doing the same sending us the components? Should all our customers be doing the same, or should we be doing the same for all customers?

All thoughts welcome. Thanks in advance.

Roundtuit  
#2 Posted : 14 April 2021 15:31:10(UTC)
Rank: Super forum user
Roundtuit

As with all such assertion ask them to point out where this is written in black & white.

A quick flick through PM15 finds reference to BS EN ISO 8611-3:2012 Pallets for materials handling. Flat pallets. Maximum working loads.

All other matters place design duties firmly upon the supplier as consideration of materials, stacking etc.

I am however suspicious where you mention crates arriving separately - as soon as the load alters the design should be re-considered but there is still no SWL required.

Roundtuit  
#3 Posted : 14 April 2021 15:31:10(UTC)
Rank: Super forum user
Roundtuit

As with all such assertion ask them to point out where this is written in black & white.

A quick flick through PM15 finds reference to BS EN ISO 8611-3:2012 Pallets for materials handling. Flat pallets. Maximum working loads.

All other matters place design duties firmly upon the supplier as consideration of materials, stacking etc.

I am however suspicious where you mention crates arriving separately - as soon as the load alters the design should be re-considered but there is still no SWL required.

pardhonsi  
#4 Posted : 14 April 2021 15:55:36(UTC)
Rank: New forum user
pardhonsi

Originally Posted by: Roundtuit Go to Quoted Post

As with all such assertion ask them to point out where this is written in black & white.

A quick flick through PM15 finds reference to BS EN ISO 8611-3:2012 Pallets for materials handling. Flat pallets. Maximum working loads.

All other matters place design duties firmly upon the supplier as consideration of materials, stacking etc.

I am however suspicious where you mention crates arriving separately - as soon as the load alters the design should be re-considered but there is still no SWL required.

I found the same thing whilst going through PM15.

As with the crates - some components come on a large pallet (these are large thin sheets of aluminium), and other extrusions and fittings come in a crate. It is something they provide, so we chemically treat the aluminium and place them back as they were, protected by acid free paper, and send it back. We don't alter anything except the surface of the aluminum, which will be approx 2g/m2 lighter. The pallet is usually shrink wrapped to ensure the components are secure, the lid is placed onto the crate and its all sent as it arrived.

There is no requirement to mark the pallet with the SWL as pallets are regularly used for different loads, so today's SWL will differ from tomorrows. But they are saying that we are required by law to SWL the packaging to tell them the weight of their own product.

So would you say we have a legal requirement, or should that onus be on them?

Roundtuit  
#5 Posted : 14 April 2021 20:22:59(UTC)
Rank: Super forum user
Roundtuit

Get them to justify their assertion backed up with demonstrable fact - as you have seen PM15 fails to mention SWL in any manner let alone who must mark it.

The SWL for the actual pallet will be a constant so long as it remains in good condition - if it is designed to carry 750Kg then that is what it can carry. It will not magically be able to support 1000Kg just because the day has changed, but with wear and tear it could reduce.

Roundtuit  
#6 Posted : 14 April 2021 20:22:59(UTC)
Rank: Super forum user
Roundtuit

Get them to justify their assertion backed up with demonstrable fact - as you have seen PM15 fails to mention SWL in any manner let alone who must mark it.

The SWL for the actual pallet will be a constant so long as it remains in good condition - if it is designed to carry 750Kg then that is what it can carry. It will not magically be able to support 1000Kg just because the day has changed, but with wear and tear it could reduce.

stevedm  
#7 Posted : 15 April 2021 07:03:59(UTC)
Rank: Super forum user
stevedm

The problem is that in the UK we don't use a standard pallet...some places provide information and some mark it on the boxes for integral palletts...find out if you have a reliable design pallett and work from there...you can make a judgement to what you mark on the pallett from that...there are all forms of compliance...if it is s Euro then use that design basis and mark it accordingly to its max swl..

CptBeaky  
#8 Posted : 15 April 2021 10:12:27(UTC)
Rank: Super forum user
CptBeaky

Why not just ask that the incoming goods have a weight on them (citing the same standard of, as it seems, it comes from the same customer)? That way you could just update the weight after restacking, taking into account the weight of the crates if they are added (just weigh one crate and use it as a guide). We had to do this to aid in delivery prices at a previoius employment.

Kate  
#9 Posted : 15 April 2021 11:15:02(UTC)
Rank: Super forum user
Kate

As you are the final part of the supply chain the pallets of goods will presumably be going to your customer's customer in the form you have packed them.

It seems reasonable to me that the customer's customer may want to know the weight of the load they will be receiving and that they have asked their supplier (your customer) to put this on the packaging.  They would in turn pass this request on to you as you are doing the final packaging.

So in short I don't see this as to do with legal requirements but to do with customer requirements, and perfectly reasonable customer requirements at that.

Users browsing this topic
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.