Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 03 May 2002 15:33:00(UTC)
Rank: Guest
Admin

Posted By Adam Jackson Does anybody know if the five decimal places used when weighing dust filters is legally binding? We have our own Lab who can do to three places but not to five so we are using an external lab which is costing a fortune. At the end of the day, people usually only ever quote to two decimal places so hopefully three is ok?
Admin  
#2 Posted : 03 May 2002 18:20:00(UTC)
Rank: Guest
Admin

Posted By Paul Leadbetter Adam MDHS 14/3, like all such methods, represents current best practice but is not legally binding. 14/3 states that the lower limit of detection for gravimetry should be an order of magnitude lower than the appropriate exposure limit. The limit of detection will depend, in part, on the sensitivity of the balance used. Therefore, you should ensure that the sensitivity is appropriate for the dusts you are trying to measure. For example, if you are measuring non-toxic dusts (nuisance dust), you need to able to measure down to 1 mg/m3 but, if you are measuring, say, nickel dust, you need to be able to measure down to 0.01 mg/m3. Regards Paul Leadbetter
Admin  
#3 Posted : 09 May 2002 09:51:00(UTC)
Rank: Guest
Admin

Posted By Adam Jackson Thanks Paul. Think I'll stick to 5 figures and play it safe. Adam.
Admin  
#4 Posted : 09 May 2002 18:35:00(UTC)
Rank: Guest
Admin

Posted By Simon Wilkins Adam, The number of decimal places does not necessarily reflect accuracy - 0.00002, 0.2 and 200 are all measurements accurate to one significant digit. Likewise 0.00345, 0.345 and 345 all suggest three digit accuracy. If you are measuring a dust concentration (weight per volume) then you should only quote a figure to an accuracy reflecting the least accurate part of measurements. Anything else is suggesting a spurious accuracy. There is absolutely no point in paying for great accuracy in the weighing if this is not matched by the accuracy of the volume measurement. Our own lab can almost cetainly weigh more accurately than your volume measurement technique which may only be accurate plus or minus a few percent.
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.