Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 25 July 2002 13:25:00(UTC)
Rank: Guest
Admin

Posted By Ashley Williams One of our leased sites has a strange issue relating to the fire exits, there is only one way in or out of the building. The windows are all restricted in their opening to approx 10cm, and the only fire alarm point for the ground floor we occupy is in the main entrance area, i.e. the one way in or out. My concern is that should a fire occur, the staff would be confined to the building due to its design. There are two fire doors between our staff and the main entrance, which should provide 30 - 60 minutes burn time depending on the door so the staff, should be ok but I still have concerns. Has anyone come across a similar situation? Ashley
Admin  
#2 Posted : 25 July 2002 13:27:00(UTC)
Rank: Guest
Admin

Posted By Ashley Williams Just another thought, because of the design, could this be considered a confined space? Ash
Admin  
#3 Posted : 25 July 2002 15:29:00(UTC)
Rank: Guest
Admin

Posted By Andy Ashley, Sorry, I am no expert, but just a thought. What is the size of the structure/floor they are working and how many people might occupy the space in normal circumstances? Andy.
Admin  
#4 Posted : 25 July 2002 16:08:00(UTC)
Rank: Guest
Admin

Posted By John Webster You will find that this is not at all unusual, and even in multi-exited buildings there may be substantial dead-ends with only one way out. The regulations cover this sort of situation. Basically, the exit route should be a protected route, typically the walls of the exit route should be be fire resistant ( eg in partition walls, a double, overlapping layer of plasterboard on each side). All doors leading onto that protected exit route must be self closing fire doors. The rooms adjoining the route should either have smoke detectors or wired glass panels to allow a fire to be seen. There should be no significant quantities of combustible material in the protected route, and certainly no potential fire sources like electrical appliances. Finally there is a maximum travel distance from any point in the workplace to the protected exit route. The exit route should therefore always be available for up to 1/2 or 1 hour even with a fire in one of the adjoining rooms.....PROVIDED THAT the fire doors fit properly and are kept closed. If you have a fire certificate it will describe the type of protection to be maintained. Of course, older premises without a certificate may not be up to this standard, so check your concerns with the local Fire Prevention Officer.
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.