Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 24 October 2002 08:40:00(UTC)
Rank: Guest
Admin

Posted By Paul Leadbetter Good morning, everyone As the chlorine content of household bleach cannot be guaranteed, is sodium dichloroisocyanurate still recommended for cleaning up body fluids? If so, what strength solution is required to ensure effective disinfection? Thanks in anticipation Paul
Admin  
#2 Posted : 24 October 2002 12:45:00(UTC)
Rank: Guest
Admin

Posted By Diane Warne Paul, We recommend any chlorine-releasing agent that provides 10,000ppm available chlorine. We do allow the use of household bleach, diluted to give at least 10,000ppm, as long as the stock bottle is reasonably fresh. We advise housekeepers to keep only small stocks of bleach, purchase it from a commercial cleaning supplies company rather than use domestic bleach, and chuck out any old stocks. Since 10,000ppm chlorine is well above the concentration that will inactivate viruse and kill bacteria, it shouldn't matter if the bleach is a little bit low in chlorine. NaDCC is fine but is only used in lab environments here. regards Diane Warne
Admin  
#3 Posted : 24 October 2002 12:47:00(UTC)
Rank: Guest
Admin

Posted By Jim Walker When chosing substances for biocidal effects be careful you don't add another hazard. If the substance will kill bugs it usually has some nasty effect on human tissue too. I use stuff called Virkon which is as about idiot proof as you can get. Contact me if you want details.
Admin  
#4 Posted : 24 October 2002 13:53:00(UTC)
Rank: Guest
Admin

Posted By Ciaran McAleenan Paul You could consider using a fire retardant absorbant material that can then be brushed up and disposed of. Check local authority arrangements for disposal of the absorbant. I can get you more details if you are interested. Ciaran
Admin  
#5 Posted : 24 October 2002 14:32:00(UTC)
Rank: Guest
Admin

Posted By Diane Warne Ciaran, I would advise against use of an adsorbant for cleaning up blood and other high-risk body fluids, unless you have disinfected the spill with a suitable disinfectant first. That may be what you meant, but it wasn't quite clear. Some granulated/powder disinfectants do absorb the fluid as well as disinfect it (e.g. Virkon powder as recommended by Jim, which you can buy in a squeeze-pack like a Harpic container.) The reason we recommend a chlorine-releasing agent is that this is the agent of choice according to all the literature on inactivating blood-borne viruses. Bleach is also much cheaper than the powder/granule formulations and as long as appropriate safe working procedures are used (according to COSHH assessment) can be used safely. Regards Diane
Users browsing this topic
Guest (2)
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.