Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 30 October 2002 15:37:00(UTC)
Rank: Guest
Admin

Posted By Jerry Hill Will someone please point me in the right direction of any documents that give recommended (or minimum) distances between desks, gangways, pedestrian routes etc. I'm presuming it may be a BS publication but would be grateful for any guidance that may be out there. Thanks
Admin  
#2 Posted : 30 October 2002 16:07:00(UTC)
Rank: Guest
Admin

Posted By Marie Dolman Jerry, You could try the Workplace Health, Safety & Welfare Regs / Approved Code of Practice. Regulations 10 and 11 relate to room space requirements and workstations. Regards Marie
Admin  
#3 Posted : 30 October 2002 16:12:00(UTC)
Rank: Guest
Admin

Posted By Jim Walker Fire Safety - an Employer's Guide pubilshed by Home Office/HSE ISBN 0-11-341229-0. Page 49 - " Corridors should generally be about 1 metre wide although wheelchair users will need 1.2 metres.........."
Admin  
#4 Posted : 31 October 2002 09:31:00(UTC)
Rank: Guest
Admin

Posted By Laurie Normal internal door is 75 cm and I would not go much below this for normal movement when positioning furniture Laurie
Admin  
#5 Posted : 31 October 2002 10:52:00(UTC)
Rank: Guest
Admin

Posted By Ian Mycroft Jerry I think this was the subject of another thread but I have looked back and can't find it. In general and from memory the the dimentions mentioned were 900mm between the back of one desk and the front of another to allow for the chair to pushed back enough for comfortable access. If two people are back to back 1800mm should be allowed between the desks. It also talked about walkway widths for main and secondary routes, etc. Ian
Admin  
#6 Posted : 31 October 2002 12:28:00(UTC)
Rank: Guest
Admin

Posted By Zyggy Turek Jerry, I believe that I contributed to the previous thread mentioned by Ian where I indicated the occupational space requirements that can be found in "The Journal Metric Handbook" produced by the Royal Institute of British Architects. This forms the basis for standards applied by architects in the UK. In addition to the measurements mentioned by Ian,others include aisle widths of 750mm for a "minor" office; 900mm for a "normal" office & 1500mm for a "major" office. In addition, the Fire Precautions Act 1971 also has dimensions for door widths & exit routes.
Users browsing this topic
Guest (2)
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.