Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 04 March 2003 13:34:00(UTC)
Rank: Guest
Admin

Posted By Vicky Pye Can you help ?? The office where I work is an inner room in a building. The room has two doors on either side of the room which lead into other rooms in the building. One door has a window panel in but the other does not, therefore we are unable to see into this room. Is it a requirement under the fire regs for this door to have a window panel ?? Thanks for your help !
Admin  
#2 Posted : 04 March 2003 14:27:00(UTC)
Rank: Guest
Admin

Posted By Oliver Whitefield Vicky Surely under the Management Regs this should be identified as a potential hazard, particularly if two people are about to use the door at the same time - the one on the inside is likely to get a face full of door!! Oliver
Admin  
#3 Posted : 04 March 2003 17:31:00(UTC)
Rank: Guest
Admin

Posted By Paul Huber Vicky, I looked into this some time ago. From a Fire prevention point of view there is nothing in the Fire regulations that require them specifically. I went to the buildings control section of the local council for advise, I was told that: Rooms with rooms require vision panels unless there is a fire detection system linked to a fire evacuation system in the building, in which case they are not required; the theory being that the occupants would be alerted to a fire long before there was any danger. Also inward opening doors that do not open into a corridor or walkway do not require them for safety. I asked for written confirmation but never received it (Councils!). I'm not sure that this would be the advise of your council and in my experience they do tend to vary from one authority to another. Good luck!
Admin  
#4 Posted : 05 March 2003 09:24:00(UTC)
Rank: Guest
Admin

Posted By Ken Taylor If the room into which you cannot see is a workplace for people (eg not just a storeroom or toilet), does not have an alternative exit, and your room is without automatic fire detection it would have been required to have a fire-resisting vision panel under fire certification and this would be needed under fire risk assessment.
Admin  
#5 Posted : 05 March 2003 10:17:00(UTC)
Rank: Guest
Admin

Posted By Eric Burt ......... but remember to put the vision panel low enough in the door for a wheelchair user to be able to see through it. Remember DDA..... Eric
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.