Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 21 December 2004 15:09:00(UTC)
Rank: Guest
Admin

Posted By Darren Bates Afternoon, I'm in a catch 22 situation and require any advice available. We have a production area situated next to dispatch area. The dispatching of goods throughout the day requires the large shutter door to be open approx 3-5 times a day at half hour a time. I have taken accurate temperatures at different timed intervals and it is evident that the heating in situ is not adequate to keep a constant temperature whilst the doors are open, it takes roughly an hour to get back up to a 'reasonable' temperature (16degrees). I have been told by the workers that they will walk out if nothing is done the next time they are really cold. I have made suggestions to the board on various solutions,ie, speed doors, curtains, alternative/extra heating but I am frustrated by the lack of commitment as a quote from the MD was "we don't know how long this cold snap is going to last". Can anyone throw any light on this subject or any advice on how to tackle a 'tough' MD??
Admin  
#2 Posted : 21 December 2004 15:19:00(UTC)
Rank: Guest
Admin

Posted By Dave Joyce Lift his desk and place it in the work area concerned, challenge him to sit in it for 4 hours whilst the cold spell is on and wait for the purchase order to be signed.....
Admin  
#3 Posted : 21 December 2004 15:37:00(UTC)
Rank: Guest
Admin

Posted By Joe Quinn Darren, I'm assuming you are a safety advisor so your job seems to be done here. If you have proferred advice to management and they chose to ignore it that cannot, then, be your responsibility - it becomes a management problem and their responsibility.
Admin  
#4 Posted : 21 December 2004 15:43:00(UTC)
Rank: Guest
Admin

Posted By Ron Young Was involved in an identical situation and we fitted heavy duty PVC screens to the door to reduce cold air ingress and we supplied fleeces to the affected operators. It worked well for not a lot of dosh
Admin  
#5 Posted : 21 December 2004 16:20:00(UTC)
Rank: Guest
Admin

Posted By cameron We had a seperate Goods In bay consisting of perspex screens and shutter door attached to the outside shutter door at Formula 1. Other alternative is to let them walk out and the MD will soon panic when he sees his/her money not coming into the business. Concerned about a comment where the workers were issued with fleeces, thought PPE was a last resort! Ian Cameron Safety Advisor Gee Construction Ltd
Admin  
#6 Posted : 22 December 2004 13:00:00(UTC)
Rank: Guest
Admin

Posted By Fred Pratley Presumably the door is left open to allow for loading of vehicles against the door? If you have the space, why not arrange to park the vehicle away from the door, take all the stuff to be loaded outside, then shut the door. Also can the production area be shielded from direct draughts by using racking as a wind break?
Admin  
#7 Posted : 22 December 2004 14:59:00(UTC)
Rank: Guest
Admin

Posted By Danny Swygart I predict that your MD will do nothing hoping that the employees will forget about it all once the temperatures increase, this will then reoccur next year.....and the year after..and the year after. Unless of course someone actually makes a stand and walks out. Money is probably all that your MD understands and he is probably so far removed from reality up in his ivory tower that he has lost all sense of what it is like to be a worker on the shop floor (if he ever knew in the first place). Remind him that it is xmas and a workplace with a reasonable temperature could be his present to his staff this year! Rant......rant.....rant....Scrooge...Bah Humbug! Merry Xmas Everyone!
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.