Rank: Guest
|
Posted By Davelfc
I was hoping some one could enlighten me to the exact requirements of safety harness inspections, and the recording of. I am introducing a safety harness register and wish to give some guidance notes on the form to those filling in the register, many thanks in advance
Dave
|
|
|
|
Rank: Guest
|
Posted By The toecap
Dave i've tried to sedn you a document regardint this but it came back.
Give me an email and i'll try agin
|
|
|
|
Rank: Guest
|
|
|
|
|
Rank: Guest
|
|
|
|
|
Rank: Guest
|
Posted By Keith Jones
Dave,
The Work at Height Safety Association has a guidance note on inspection for free download from http://www.wahsa.co.uk/c...cat_view/gid,5/Itemid,8/
People inspecting harnesses must be competent to do so. It is unlikely they could be regarded as competent by reading some bullet point advice.
Keith Jones
heightec
|
|
|
|
Rank: Guest
|
Posted By Davelfc
Keith,
many thanks for the reply, i probably was not clear enough on my initial posting I should have probably mentioned where I am. I understand the requirement to have competent persons onsite for both instalation and inspection the instalation is not aproblem we have a specialist contractor with the relevant levels of competence. I have previously put in a training program from training needs analysis that I conducted, all of my site and projects managers and foremen are FASET trained. I have also trained all of the operatives to raise their awareness, so they understand defects or poor practices of instalation in the net. This is so that they can inform management if they spot any fall protection issue's, I have found that actually this has worked well as they are looking for areas they previously did not see as an issue, but defects are there to the trained eye. All of these people are FASET certificated.
What I was really after was an all encomapssing check list if any one had one, I have already introduced an instalation checksheet that get sigend up to post installation and pre use by installer and manager. I was hoping there was some one out there with a wealth of experience that could add to what I ahve already put in place I feel there is a need for a pre use inspection and ongoing inspections similar to that of scaffold hand over and inspection. Having not been a practical net erector possibly lack a working knowledge in that department.
I have observation, having watched these net erecters, they seem to be more at risk at times than the men working above the nets once they are installed, particularly when they are securing the corners to the elevations of steel frame under construction, once they are clipped on they are okay. has any one else noticed this and are there any inustry solutions
|
|
|
|
Rank: Guest
|
Posted By Keith Jones
Dave,
not sure if you are concerned with nets or harnesses? If harnesses, in addition to the HSE info suggested by DABT above, there is a checklist in BS 8437.
Keith
|
|
|
|
Rank: Guest
|
Posted By Davelfc
Many thanks for that keith I will have look, Sorry got mixed up with an earlier thread I posted. I am interested in both, I am looking at all aspects of work at height Fall, prevention protection and arrest.
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.