Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 14 November 2006 10:49:00(UTC)
Rank: Guest
Admin

Posted By Barry Tovey Hi all, Has any Logistics based advisors had to recommend to place barriers on an open dock for their Transport operations? Our dock has stairs at either end and edge markings with safety notices. But no barriers.
Admin  
#2 Posted : 14 November 2006 11:23:00(UTC)
Rank: Guest
Admin

Posted By Descarte Our guys regularly offload from bulk liquids to tankers/ships, because they are offloading flammables the only barriers we errect are to prevent FLT's and vehicles entering the area whilst we offload. We do not currently errect any physical barriers on the edges of the docks, however all drivers, supervisors and employees involved do have to wear life jackets. I would be interest to see if there were any additional requirements of if you find any other relevant information Thanks Des
Admin  
#3 Posted : 14 November 2006 13:21:00(UTC)
Rank: Guest
Admin

Posted By Salus Hi Des, u have probally thought about it already, are your FLT operatives made to wear seat belts when operating dockside?.
Admin  
#4 Posted : 14 November 2006 16:48:00(UTC)
Rank: Guest
Admin

Posted By mbarrett There are specific requirements for fencing etc laid out in - Safety in Docks - (Dock Regulations 1988 ACOP)ISBN 071764085 As far as I can remember and it is a long time ago the recommendations in this guide are for fencing/barriers at the corners of the docks or where there is a significant change of direction. However don't quote me as it's been a while since I used these regulations. Hope this is of some use
Admin  
#5 Posted : 14 November 2006 18:23:00(UTC)
Rank: Guest
Admin

Posted By Ken Taylor Beyond the legislative requirements, it's down to risk assessment again. RoSPA have published general guidance for inland waters giving various degrees of recommended edge protection (or none) for different areas. Perhaps their Water Safety Advisor could give you some pointers?
Admin  
#6 Posted : 15 November 2006 12:56:00(UTC)
Rank: Guest
Admin

Posted By steve e ashton Barry was your query referring to docks as in 'docks wharves and quays' or to docks as in loading bays in busy warehouses with lorries reversing and forklifts zipping about? Your reference to stairs at each end suggests the latter to me.... The former seems to have been answered in part - the latter not at all so here goes:- Yes, I have advised logistics operations about the need to provide protection at loading bay edges. The risks are clear and obvious - and the work at height regs do not just apply where you can fall more than 2metres. Barriers applicable will depend on the nature/height of the dock, the nature / type of goods handled across the dock the presence of building structural elements the type and range of traffic delivering / removing goods the type and range of handling equipment If your dock edge is isolated from the main FLT thoroughfares, then a pedestrian barrier (Handrail / chain) may (possibly) suffice. If your FLTs routinely pass along the loading edge, then you have to consider traffic-proof barriers to prevent the otherwise almost inevitable drive-off-edge incident. Such barriers can be installed, but you need to be aware of the need for robust and workable management arrangements for removal / replacement when wagons arrive for loading / unloading. There can be no single solution to this problem - so much depends on so many factors. E Mail off forum if you think I may be able to assist you in developing your risk assessment and any controls. Steve
Users browsing this topic
Guest
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.