Welcome Guest! The IOSH forums are a free resource to both members and non-members. Login or register to use them

IOSH Forums are closing 

The IOSH Forums will close on 5 January 2026 as part of a move to a new, more secure online community platform.

All IOSH members will be invited to join the new platform following the launch of a new member database in the New Year. You can continue to access this website until the closure date. 

For more information, please visit the IOSH website.

Postings made by forum users are personal opinions. IOSH is not responsible for the content or accuracy of any of the information contained in forum postings. Please carefully consider any advice you receive.

Notification

Icon
Error

Options
Go to last post Go to first unread
Admin  
#1 Posted : 06 August 2007 12:24:00(UTC)
Rank: Guest
Admin

Posted By halesowen Baggie
At what stage should the emergency services be called where there is a leak of LPG gas?
The gas I know is heavier than air and collect in drains etc. How would the emergency services make any collected gas safe?
Admin  
#2 Posted : 06 August 2007 15:25:00(UTC)
Rank: Guest
Admin

Posted By Steve Cartwright
What sort of quantities are we talking about.
What is the LPG stored in?

Admin  
#3 Posted : 06 August 2007 15:39:00(UTC)
Rank: Guest
Admin

Posted By halesowen Baggie
Bulk tank 2002 ltrs.
Admin  
#4 Posted : 06 August 2007 15:39:00(UTC)
Rank: Guest
Admin

Posted By The toecap
Have a look at the Flogas web site
Admin  
#5 Posted : 06 August 2007 15:41:00(UTC)
Rank: Guest
Admin

Posted By The toecap
Also. Replace cap if possible. Move cyclinder to a safe area and call the dealer. If the flame does not go out when the regulator is turned off, leave the appliance alight and call your dealer. Do not attempt to diconnect.
Admin  
#6 Posted : 06 August 2007 15:42:00(UTC)
Rank: Guest
Admin

Posted By The toecap
Ahhhh. Oh
Admin  
#7 Posted : 06 August 2007 16:39:00(UTC)
Rank: Guest
Admin

Posted By garyh
I would ask the supplier this question.

Without being clever, surely this requires a formal risk assessment? 2000 litres of LPG is a serious quantity and requires proper management and planning, one part of which is the emergency planning aspect.

You "only" need 10 Tonnes to get into lower tier COMAH for materials (such as Propane, Butane) classified as "extremely flammable".

In addition The Highly Flammable Liquids and Liquefied Petroleum Gases Regulations 1972 apply, and there is great guidance available from the HSE.
Admin  
#8 Posted : 06 August 2007 16:58:00(UTC)
Rank: Guest
Admin

Posted By Pete48
Baggie, have you seen this link from the LPGA?
(the LPG Association not the golfers!!)
http://www.lpga.co.uk/LPGA.htm

They also produce a whole series of codes that will help you manage your storage properly.
From memeory, COP3 is most probably the one you need (but check with the LPGA). for your current question and to help you build the plan you should have in place for the mgmt of this facility.Cost is about £25.

Prompt action by trained staff may well be able to control a leak situation without the need for emergency assistance but the response depends on the design of the facility, the staff and the nature and type of the leak. A small leak from a pipe joint for example is a different matter to an uncontrolled leak from a tank of 2000 litres volume.
Users browsing this topic
Guest (2)
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.